Quote:
Originally Posted by jim1
Any ideas where to find the 12v connection for the pre wired rear view camera on a Cougar 315rls. It's always hot(on) except when you pull the 4th zone 12v fuse. I would like to put a wireless remote switch on the hot+ feed to isolate it when not in use.
|
I assume you are measuring power at the camera connector. Which you stated is fused from the "4th zone 12v fuse" Two things I would consider 1.) wire the remote switch right off that camera connector, 2.) determine what other devices that fuse feeds. My guess is the camera connector is wired to the closed device on that fuse. You could remove that device and get to the wiring feeding that camera connector and install your remote switch there. Hope I understood your question
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)