Slide and Panel issues

[NWRick]

Well, I finally found the issue. I systematically eliminated components and found that a wire in the reversing polarity loop was bad. Traced the wire and found the issue close to the inverter and breaker cabinet. Pulled the cabinet and found the wire grounding out to the frame were it goes through the floor. Anyway, I have a good idea how the electrical system works. This issue also caused the remote circuit board to go out.

Rick

[BuxCamper]

Excellent! Many times that's how you have to do it. Work through a system piece by piece. Not just RV but multi-million dollar systems too.

-- Mark