The gutter in the link above is what I used, but the end caps that Lowes sells with it (shown on the same weblink) will not fit into the fence post. They are about 3/4" too wide. The only way I could figure out to close the ends was with a piece of 3.4" fir cut to fit inside the gutter and 2 small wood screws on each side. Don't put screws on the bottom as they will cut into the fence post interior every time you slide the drawer out and shorten the life of the plastic.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|