66Joej HI I got mind installed last summer, what I did was buy a electric fireplace on sale from homedepot cost me 99.00 has two levels of heat plus two fan speeds and a remote that fit in were the desk area was, had about 2.5 in on both sides made a frame to fit fce of fireplace built a box between floor and bottom of fireplace to support it, put some cleits on the sides to mount the face plate frame to the sides with screws and to trim it off got some thin molding I liked stained to match cabinet put velcro on back of trim cause you now some day your going to have to pull it out for some reason, for the power I drilled a hole in back corner were the other power comes in for the slide power ran cord under the slide with the other cords about one foot and put a better plug on it tideraped it up good , now I run a 12 gauge power cord over to the power pole, works great and didn"t cost that much, nows the time to look for a unit that will fit good luck , email me if you have any quistions ok.
|