|
09-09-2013, 12:31 PM
|
#1
|
Senior Member
Join Date: Jan 2013
Location: Winterset, Ia
Posts: 280
|
electric surges
Has anyone had a voltage spike go way high and then low. I am using a surge protector and checked voltage at electric pedestal so I am sure it is after the surge protector will a converter cause this. It has taken out microwave and clock radio.
|
|
|
09-09-2013, 08:38 PM
|
#2
|
Junior Member
Join Date: Sep 2013
Posts: 5
|
Quote:
Originally Posted by tdawg
Has anyone had a voltage spike go way high and then low. I am using a surge protector and checked voltage at electric pedestal so I am sure it is after the surge protector
|
Numbers are always required to get useful answers. Specifically, what is each number for high and low?
Well, 120 volt surge protectors typically ignore and pass through any voltage below 330 volts. That number should be on the protector's box. Completely different devices (also called protectors) do something completely different. Again. A useful answer requires facts with numbers. Specifically, what of so many completely different devices (all called protectors) are you using? Did you see numbers high enough to get the attention of that surge protector? IOW read its manufacturer specifications. Or post them here so that others can say what it actually does.
Converters take significantly varying AC voltages. Then convert them to rock solid and stable output voltages. Converters do not create voltage variations on a pedestal. Protection already inside appliances makes most voltage variations irrelevant. To say more requires specific numbers.
|
|
|
09-10-2013, 03:13 AM
|
#3
|
Senior Member
Join Date: Jan 2013
Location: Winterset, Ia
Posts: 280
|
This is happening on a friends 5th wheel with 50 amp I don't have numbers just that they have been to 2 different campgrounds and has happened both times. I knew this was a shot in the dark . I was wandering if a surge protector could cause high voltage if anyone of you have heard of such a thing
|
|
|
09-10-2013, 05:54 AM
|
#4
|
Senior Member
Join Date: Jun 2011
Location: Winnipeg, Mb
Posts: 110
|
This summer we must have had an electrical surge. We had used a 30 Amp extension cord to connect between the power cord coming out of our trailer and the power pedestal. When we were packing up the coupling between the cord coming out of the trailer and the cord coming out of the pedestal were fused together. Basically the plastic on the end of the extension cord had melted and I had to pry it apart with a screw driver. The positive prong and corresponding receptacle were black from the surge. It appears that the damage to my extension cord is cosmetic and it will still function, at least I hope so. Guess I will find out next year.
I'm not an electrician so I am assuming it was a power surge. The connection was suspended above the ground and there was no rain while we were there so it couldn't have been a short caused by moisture. We also have a Progressive Industries surge protector so no damage was done to the trailer although no error message was registered so not sure what exactly happened but glad I put the Surge Protector on this spring.
__________________
Bruce & Lori, now happily retired and Charli (our 60lb lap dog)
2011 F350 KR 6.7PSD, 4x4, CC, SB, Reese Elite 18k.
2015 Mountaineer 331RLT, 5thAirborne Sidewinder, Dual A/C, Fireplace, HT Seating, Dual Pane Windows, Cocoa interior.
|
|
|
09-10-2013, 07:41 AM
|
#5
|
Member
Join Date: Sep 2012
Posts: 32
|
Since it's happened at two different campgrounds my guess would be a wiring problem in the RV that's putting 230v from the 50 amp service onto one of the 120v legs in the trailer.
Alan
__________________
2012 Cougar Xlite 26SAB
|
|
|
09-20-2013, 10:21 AM
|
#6
|
Senior Member
Join Date: Jul 2013
Location: Box Elder
Posts: 2,910
|
If your friend was using a 30 amp cord to serve a 50 amp trailer, it is very possible that there was too much electric load that caused the connection to overheat. With a 30 amp connection, you don't get much more power to run much else besides one A/C and keep the batteries charged. We have a 50 amp 5th wheel and when only connected to a 30 amp pedestal, we set the fridge and the water heater to gas mode and don't use the microwave and only use one of the A/C's. With a 30 amp connection, there is only one wire capable of carrying 30 amps. With a 50 amp connection, there are two wires capable of carrying 50 amps each, for a total of 100 amps, so you have less than a third of the power available with a 30 amp connection than you do with a 50 amp connection. A "surge" would not have caused the burnt connection you described.
__________________
Bob & Becky
2012 3402 Montana
2012 Chevy 2500HD D/A CC
|
|
|
09-20-2013, 04:29 PM
|
#7
|
Senior Member
Join Date: Jul 2011
Location: Ottawa Valley
Posts: 329
|
Your burnt connections are caused by a loose or high resistance connection while most likely running at max amperage draw. If the connections are discoloured by heat they are not suitable for further use.
__________________
2011 325SRX , Mor-Ryde Pinbox
2004 Ram 3500DRW 6spd,4x4,QC.LB ,340L aux tank
1999 Concours
2014 FJR
2014 Jetta TDI
|
|
|
10-09-2013, 06:26 AM
|
#8
|
Junior Member
Join Date: Sep 2013
Location: South Carolina
Posts: 6
|
electric surges
This raises a question in conjunction with the electrical issue --- I have a 30 amp surge protector I used for a 30 amp 5er and have moved to a 50 amp (Montana 2955). Will the 30 amp protector work for the 50 amp connection if I am plugged into a 50 amp post (or 30 amp if 50 not available)?
|
|
|
10-09-2013, 02:15 PM
|
#9
|
Senior Member
Join Date: Aug 2010
Location: North Texas
Posts: 1,000
|
Quote:
Originally Posted by pearlygate
This raises a question in conjunction with the electrical issue --- I have a 30 amp surge protector I used for a 30 amp 5er and have moved to a 50 amp (Montana 2955). Will the 30 amp protector work for the 50 amp connection if I am plugged into a 50 amp post (or 30 amp if 50 not available)?
|
Pearlygate -
1) No!
2) Don't do it! Wiring is different.
3) If you do, might see the Pearly Gates.
Ron
__________________
2011 Alpine 3640RL (Beauty)
(Gone! Now replaced by Beauty3)
2016 Ford F-450 (The Beast)
Diesel 4x4, DRW, LB, CC
Comfort Ride Hitch
|
|
|
10-10-2013, 06:08 PM
|
#10
|
Senior Member
Join Date: May 2013
Location: alabama
Posts: 272
|
i love electrical
well on my 3912 the folks at keystone didn't strip the wire back enough on the shore line where it plugs into the rv. it would let the power fade in and out. I fixed the problem. as for a surge protector what kind? I researched and liked the progressive industries "surge protector" with high/low voltage shut off and shut off for broken ground and wrong power frequency. it was under 350.00. and has remote display. if it is that campco thing well you get what you pay for. also note a broken ground can result in your 120 volt stuff getting 240 volts. here is where I got the protector http://www.lawrencerv.com/products.asp?cat=13
__________________
1999 fl70 freightliner. 2011 3912 lev raptor. 2008 Vulcan 900lt. 2005 leighman trike c50 suzuiki boulevard
|
|
|
10-10-2013, 06:27 PM
|
#11
|
Senior Member
Join Date: May 2013
Location: alabama
Posts: 272
|
note to pearlygate
to explain rv power think of it this way. a 50 amp service is 50 amp 240 volt or 50 x2= 100 amps total power. a 30 amp service is 30 amp 120 volt or 30x1= 30 amps total power. all 240 volt power is is two 120 volt power legs put together. I hope this helps
__________________
1999 fl70 freightliner. 2011 3912 lev raptor. 2008 Vulcan 900lt. 2005 leighman trike c50 suzuiki boulevard
|
|
|
10-20-2013, 07:36 PM
|
#12
|
Senior Member
Join Date: Jul 2013
Location: Box Elder
Posts: 2,910
|
Before you burn up anything else, you need to check for a loose neutral connection somewhere from the plug on in to the trailer. What it sounds like you are seeing is an open or loose neutral which can indeed cause very high voltage on one or the other hot wire. This is truly not a safe condition and can cause damage up burning your rig. If you are not comfortable around electricity, I urge you to have this checked by a competent electrician. This can also occur anywhere in the park electrical system all the way back the the transformer supplying the park, but then many other people would be seeing this condition.
__________________
Bob & Becky
2012 3402 Montana
2012 Chevy 2500HD D/A CC
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|