|
09-02-2020, 11:12 AM
|
#1
|
Senior Member
Join Date: Jan 2020
Location: Pahrump
Posts: 129
|
Key TV... the universal ongoing saga
First off, has anyone had thr Key TV system work the way it is supposed to operate? Just wondering.
My problem is the SAT connection. I am staying parked for another month so I figured I would hook up my brand new Dish system. Up until this time I have used the TVs with OTA and cable and it worked fine. Dish does not work through the Key TV system. I get a complete loss of signal screen.It isn't the system because I can run the cable from the antenna to the receiver through the slide and all is good. I pulled the panel for the Key TV and while 3 of the cables were not tight after tightening them nothing changed. I am only using the main TV in the living area.
Any ideas on where to go from here would be appreciated, if I can't get it fixed I will get it in for warranty work before the end of Jan.
__________________
2019 Raptor 356 with iFlex Smartryde Suspension
2022 F350 CC DRW 409CI Diesel
|
|
|
09-02-2020, 11:35 AM
|
#2
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
I believe the Dish system works with the receiver to power the antenna mechanics that aim the receiver... If there is no "extra power cord" attached to the satellite dish system, then it receives its power through the coax table.
The KeyTV system can not power the satellite dish system, so there's no "power going to the satellite dish to aim it at the satellite....
At least that's the way I understand it.... in other words, if you use a separate coax (not going through the KeyTV box, it'll work just fine, but that box can not be used to power your satellite dish.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
09-02-2020, 11:50 AM
|
#3
|
Senior Member
Join Date: Jan 2020
Location: Pahrump
Posts: 129
|
Quote:
Originally Posted by JRTJH
I believe the Dish system works with the receiver to power the antenna mechanics that aim the receiver... If there is no "extra power cord" attached to the satellite dish system, then it receives its power through the coax table.
The KeyTV system can not power the satellite dish system, so there's no "power going to the satellite dish to aim it at the satellite....
At least that's the way I understand it.... in other words, if you use a separate coax (not going through the KeyTV box, it'll work just fine, but that box can not be used to power your satellite dish.
|
That makes sense as that seems to be what is happening.
Thanks
bob
__________________
2019 Raptor 356 with iFlex Smartryde Suspension
2022 F350 CC DRW 409CI Diesel
|
|
|
09-02-2020, 01:02 PM
|
#4
|
Senior Member
Join Date: Jan 2020
Location: Roseville
Posts: 292
|
Ours has worked well. However, we have only used it for cable and over the air.
__________________
Jim and Carole
Roseville, MN
2018 RAM 3500 DRW, Diesel, Long Box, Air Lift Bags - 2023 Fuzion 421
|
|
|
09-02-2020, 04:54 PM
|
#5
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,013
|
The dish portable antennas receive their 12 vdc via coax cable from receiver thru the KeyTV module... IF the KeyTV module is working properly it will pass the 12 Vdc from receiver to the portable antenna...
If you haven’t reviewed the KeyTV Troubleshooting guide take a look see at their hook up diagrams.
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
09-02-2020, 05:09 PM
|
#6
|
Senior Member
Join Date: Apr 2019
Location: Henniker
Posts: 2,162
|
We have had no issues with cable or OTA. Never tried it on satellite and don’t ever intend to.
__________________
Rob & Amy
2019 Passport 240BH SL (current)
2024 Cougar 29BHL (was on order, Keystone delayed, cancelled order, exploring options)
2022 Ford F250 7.3L Godzilla Crew Cab FX4
|
|
|
09-02-2020, 08:19 PM
|
#7
|
Senior Member
Join Date: Jan 2020
Location: Pahrump
Posts: 129
|
Quote:
Originally Posted by ChuckS
The dish portable antennas receive their 12 vdc via coax cable from receiver thru the KeyTV module... IF the KeyTV module is working properly it will pass the 12 Vdc from receiver to the portable antenna...
If you haven’t reviewed the KeyTV Troubleshooting guide take a look see at their hook up diagrams.
|
Well, it looks like I will need to wring out the system, if I can get it fixed I would feel better about the whole thing. It can't be that hard.
bob
__________________
2019 Raptor 356 with iFlex Smartryde Suspension
2022 F350 CC DRW 409CI Diesel
|
|
|
09-07-2021, 03:45 PM
|
#8
|
Member
Join Date: Jan 2017
Location: Mountains
Posts: 59
|
Wondering if you have any update on this issue, same problem here with our directtv. If I put coax thru kitchen window directly into receiver works fine... I have tried everything... wrote King Quest tech support and got these notes back..
You might want to ask for a wiring diagram to see how its wired. As the majority of the time there are AB switches and other thing in line for the KeyTV system to work.
Sorry to hear that. We have run into a few issue with the KeyTV setup. If there are splitter or other components inline it will not work. As you generally need it to be a direct connection to the receiver with coax cable or cable coupler and that’s it. Supposedly the KeyTV should have something like that for satellite TV.
Help Mail
KING
Simply better, by design.
kingconnect.com
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|