Lugnut question

[Robinsons]

Getting ready for our first trip with a Raptor 297SE 2013. Want to be prepared and cannot find the correct size of the lugnuts on the 16" wheels. They do not appear to be a standard size. Has anyone encountered this?

Thanks for your input.

[Bugle Boy]

Originally Posted by Robinsons

Getting ready for our first trip with a Raptor 297SE 2013. Want to be prepared and cannot find the correct size of the lugnuts on the 16" wheels. They do not appear to be a standard size. Has anyone encountered this?

Thanks for your input.

Are you talking about the thread size or the wrench size?

Are they possibly metric?

[f6bits]

Would you happen to have a star wrench? They usually have two metric ends and two standard ends. Or maybe a socket set so you can pick around until you find the right size.

[therink]

I believe the lug nut size is 13/16".

[Bob Landry]

Originally Posted by therink

I believe the lug nut size is 13/16".

I think mina are also that size. Borrow a set of sockets , if you don't have one and verify it. You'll need a socket and a short extender to use with your torque wrench. You are going to check lug torque also. Aren't you? Harbor Freight sells them cheap, like less than $20 for one with 1/2" drive. I check mine before every trip.

[Javi]

Originally Posted by Bob Landry

I think mina are also that size. Borrow a set of sockets , if you don't have one and verify it. You'll need a socket and a short extender to use with your torque wrench. You are going to check lug torque also. Aren't you? Harbor Freight sells them cheap, like less than $20 for one with 1/2" drive. I check mine before every trip.

X2