Fuzion 403 awning

[MConnelly]

Can anybody tell me the manufacturer and the model number of the power awning that would have come on a 2009 Fuzion 403??
I need to order parts for mine and my rig is several states away AND I forgot to write down this info before I left it.
I am pretty sure it is a Domitec . It is 8 ft. X 20 Ft
Any help will be greatly appreciated .

[Grolli]

Looks like a Dometic 9100 series power awning, 20 foot, shows pewter, vendor part number 915EH20.000B, Keystone Part number 222907.

Before you go wild, you may want to call Keystone with your VIN to make sure.

[MConnelly]

thank you forgot all about calling in the vin #.

any good parts suppliers out there for same. i need the main outer tube and motor assembly.

[JRTJH]

Originally Posted by MConnelly

thank you forgot all about calling in the vin #.

any good parts suppliers out there for same. i need the main outer tube and motor assembly.

If you're talking about the roller tube that the canvas rolls up on, it is going to be very expensive if you order it online. Shipping will be by freight and that's going to add $100+ to the price. You might want to talk to your dealer and see what his price would be. Usually there's no shipping to a dealership, so it may be cheaper to support the local "sharks"

[chuckster57]

Hate to tell you John, but unless it's a warranty item he's most likely going to pay freight. Unless things are different in your area of the country.

[JRTJH]

He is in New York (I believe) so that would even be different than here. Many of the dealerships around here have a regular truck from the supplier's warehouse. Anything that's stocked or special ordered and shipped on the "regular delivery truck" is usually not charged a delivery fee. But, if you wanted it "overnighted" or if it had to come from another warehouse and not from the "regular provider", yes, there would be a pretty hefty delivery charge on something that bulky.

[chuckster57]

We do have a regular parts delivery (NTP, STAGG) and your right, IF the replacement part is in the LOCAL warehouse and no special shipping (overnight, etc.) then I agree no shipping.

I had a senior moment... I have seen roller tubes, complete awnings come both ways.

[MConnelly]

Thanks to all…I found it at a small RV parts shop in Murphy NC a few miles from my RV park. Delivered $785.00. Roller tube, new awning top, new motor.All I need to do is pick it up and install it.

[chuckster57]

IMO you did good. Install shouldn't be too difficult. Since electric awnings don't have wound springs on the roller tube, you wont need to pin the ends. Need some specific instructions? Give me a shout via PM. Your new stuff should come with instructions, and I would be happy to clarify and impart some "tricks of the trade" to make it easier.