LED Lights

[diamondjindustries]

I am having problems with the self sticking on the LED strips will not hold. How have you dealt with this problem. Thanks

[Bluewater]

Yes, I had that problem and switched to the one piece type with no stick-ons...problem solved permanently.

[I.plod]

Found in the painting department at Lowe's along the painting/ masking tape:

[diamondjindustries]

Why not clear silicone ?


Sent from my iPhone using Tapatalk

[B&T]

Originally Posted by diamondjindustries

I am having problems with the self sticking on the LED strips will not hold. How have you dealt with this problem. Thanks

Assuming your mounting on the side if your camper:

At lowes:

Utilitech 10-Pack Nylon Mounting Base for Cable Ties

and some cable ties.

http://www.lowes.com/pd_292684-47120...rap&facetInfo=

Cleaned the mounting surface with acetone then mounted one about ever 10 inches, makes it easy and inexpensive to replace the LED strip if it goes bad.

[GMcKenzie]

I was using some Goop for a different reason and just used some of that. Seems to be holding.

[Mark TC]

Put some LED lights under my Outback


Sent from my iPad using Tapatalk HD

[sagebel]

Originally Posted by B&T

Assuming your mounting on the side if your camper:

At lowes:

Utilitech 10-Pack Nylon Mounting Base for Cable Ties

and some cable ties.

http://www.lowes.com/pd_292684-47120...rap&facetInfo=

Cleaned the mounting surface with acetone then mounted one about ever 10 inches, makes it easy and inexpensive to replace the LED strip if it goes bad.

I did this as well. Also used some two part Locktite epoxy. They aren't going anywhere.