Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Toy Haulers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 02-10-2020, 08:22 PM   #1
Redneckracin51
Junior Member
 
Join Date: Feb 2020
Location: Enumclaw
Posts: 4
Help my kitchen slide is dead!!!

I have a 2018 fuzion 427 we’ve used a handful of times, I washed it and went to put all my slides out and the Kitchenette slide will not come out, I’ve checked and swapped the relays I’ve put direct power on the drive motor and still can’t make it function from the InCommand or from the backup panel in the storage compartment. I can manually drive it in and out with my drill on the motor. But other than that I’m at a loss any ideas would be appreciated.
Redneckracin51 is offline   Reply With Quote
Old 02-11-2020, 02:27 AM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,238
Welcome to the forum!! The first thing I would do is test for voltage at the motor. With the command to run the slide, test for 12V at the motor. If you have voltage the motor is bad, if not then it’s time to look at the wiring. Is there an in-line fuse, or one in the 12V fuse panel?
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is online now   Reply With Quote
Old 02-11-2020, 05:10 AM   #3
Redneckracin51
Junior Member
 
Join Date: Feb 2020
Location: Enumclaw
Posts: 4
I tested the 12v at the motor it works. So somewhere between the motor and the panel I have a problem. I have not checked the 12v fuse on the floor kick panel.
Redneckracin51 is offline   Reply With Quote
Old 02-11-2020, 05:45 AM   #4
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,238
How did you test? Have you applied 12V directly to the motor?
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is online now   Reply With Quote
Old 02-11-2020, 02:49 PM   #5
Redneckracin51
Junior Member
 
Join Date: Feb 2020
Location: Enumclaw
Posts: 4
I took the motor off and applied 12v directly to it. So I know it works (bench test)
Redneckracin51 is offline   Reply With Quote
Old 02-11-2020, 04:06 PM   #6
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
OK, so you know the motor works when you connect it to 12VDC. Have you checked the wiring to see if it's providing 12 VDC? (It could be 0VDC or maybe 5-6 VDC). If there's no voltage at the motor wire connections, then work backward to the switch on the control panel. It's a +/- switch with the 12 VDC connected to the center terminals. When you push up, it connects to turn the motor one direction, push down, the switch applies reverse polarity to run the motor the opposite direction. (makes the slide move in or out with one switch/one wire set). If you have 12VDC on the center terminal of the slide switch, then the problem is between the switch and the motor. If you do not have 12 VDC on the center terminal, then the problem is between the switch and the battery.

If all the other slides are working, I'd guess the 12 volt circuit breakers on the battery bulkhead are working, so it's likely just that "kitchen slide switch connection" or "the wiring to the kitchen slide motor". If none of the slides were working, I'd focus on the circuit from the battery to the control panel. That apparently is OK in your trailer or the other slides would not work.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 02-11-2020, 06:15 PM   #7
ChuckS
Senior Member
 
ChuckS's Avatar
 
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 2,977
Purple and white wires appear to be color code used for each electric slide out controlled via your BCM... you’ve swapped the relay at BCM for the circuit to that motor..

I’d try putting a multi meter on the plus and negative wire connection terminals at the BCM for that specific slide motor and operate using override switch

If the over ride switch isn’t applying 12 volts to that circuit then you know problem is at the BCM...

https://in-command.net/wp-content/up...ting-guide.pdf

However.. if you have voltage then you know issue is downstream toward slide actuator motor.

The purple wires should be labeled 1,2,3,4, etc so you may be able to pick up a circuit identifier label on the lead to that actuator.
Attached Thumbnails
Click image for larger version

Name:	4C5A0FD0-AB5F-4E8E-BBD1-0FC282DEDEBD.jpg
Views:	151
Size:	222.5 KB
ID:	25114   Click image for larger version

Name:	B9456BC2-F5D4-4977-9A3E-A124E272ED58.jpg
Views:	141
Size:	175.4 KB
ID:	25115  
__________________


2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
ChuckS is offline   Reply With Quote
Old 02-13-2020, 04:27 PM   #8
Redneckracin51
Junior Member
 
Join Date: Feb 2020
Location: Enumclaw
Posts: 4
Update. My dumbass overlooked the loose ground wire leaving the panel under the trailer. Crisis averted thanks for all the help guys
Redneckracin51 is offline   Reply With Quote
Reply

Tags
slide

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.