How to replace faucet handle

[rosede]

One of the kitchen faucet handles broke. I bought a replacement. I assumed that there would be a set screw, but I am wrong.

How can I take the faucet handle off and put on the replacement? Does it just pull off? I tried pulling up, but I didn't want to break things worse so I didn't try to hard.

Thanks

Daryl

[JRTJH]

It's probably a Phoenix faucet (brand name)...

There's a red plastic insert on the hot faucet handle and a blue insert on the cold faucet handle. If you pop that insert out, you'll see a screw that holds the faucet handle in place.

[bobbecky]

Could also be a Dura faucet. https://www.durafaucet.com/ Parts can be had here: https://www.rvfaucet.com/kitchen/

[rosede]

Thanks guys appreciate the feedback.

Originally Posted by bobbecky

Could also be a Dura faucet. https://www.durafaucet.com/ Parts can be had here: https://www.rvfaucet.com/kitchen/

The replacement part that I have is Dura, not because I know the make/model of the faucet, but because it matched the picture.

Originally Posted by JRTJH

It's probably a Phoenix faucet (brand name)...

There's a red plastic insert on the hot faucet handle and a blue insert on the cold faucet handle. If you pop that insert out, you'll see a screw that holds the faucet handle in place.

That's just it......I don't see a any kind of insert on the handles.

Wait......I just discovered something. At the bend of the replacement handle, there a small round decorative design, that looks like its molded into the handle, but I was able to "unplug" it with my fingernail. Any sure enough,there is a set screw. I'm sure that it what I need to do on the actual handles in the camper. I'll look.

Thanks guys, I'm sure I can get the resolved now.

Daryl