heat issue

[Bill Martocchio]

I can't change the heat setting using the in command keypad. We had the heat set to 62 last night and this morning the system wont let me raise the temp. I keeps going back to the old settings. Even if I try to turn the system off it keeps going back to the previous setting.

[pasayten]

You might try a hard reset of the InCommand main module... Turn off your main battery disconnect switch for at least 30 sec and turn back on... That should reboot system and all should be well. Good Luck!

[Bill Martocchio]

I just did a hard reset and all is now well!