2022 Keystone Zinger 328

[jschneider]

I want to mount a tv and there is apparently a plate of some kind in the wall with a sticker on it. Unfortunately there is no in dication of how think the plate is or how deep the wall is. I don't want to go through to the other side. Anyone have an answer. Thanks

[travelin texans]

A 3/4 - 1" screw should be more than adequate if there's actually a backer behind that sticker.
Look at any door opening, interior or exterior, to notice the wall thicknesses. The interior walls are hollow which could have wiring &/or plumbing running through them. The exterior walls are aluminum studs with styrofoam between them, shouldn't be any wiring or plumbing in them.
Don't confuse rv framing with house framing, the studs are not necessarily on any standard spacing, not 16' on center rather placed as needed.

[wiredgeorge]

Originally Posted by jschneider

I want to mount a tv and there is apparently a plate of some kind in the wall with a sticker on it. Unfortunately there is no in dication of how think the plate is or how deep the wall is. I don't want to go through to the other side. Anyone have an answer. Thanks

BTW: The Zinger is a Crossroads product and not a Keystone product. We welcome most any camper to our forum and you are certainly welcome but you don't seem to own a Keystone.

[travelin texans]

Originally Posted by wiredgeorge

BTW: The Zinger is a Crossroads product and not a Keystone product. We welcome most any camper to our forum and you are certainly welcome but you don't seem to own a Keystone.

Actually several years ago Crossroads was placed under the management of Keystone in a cost cutting move so ultimately it's a Keystone with a Crossroads label.