Battery Power not Getting to Unit

[FlowerChild]

Well, I haven't left the driveway yet and already have a problem. The 5th wheel is not getting power. The 2 12V batteries are fully charged. When I turn on the battery power - nothing! What do I need to check and how?

I need to close the slides, raise the jacks, etc. to move the 5er tomorrow. Anyone had this problem?

Flower

[chuckster57]

start at the 12V positive lead going to the trailer. Using a test light or Ohm meter, make sure you have 12V going to the trailer. If you have a battery cut off switch, make sure it's in the correct position and if it is, cycle it.

If you installed the second battery, then you may have popped a reverse polarity fuse at the fuse panel when hooking up the leads. That fuse should be a 40A fuse separate from the row of fuses. If you installed the second battery are you sure you hooked positive to positive and negative to negative.

[FlowerChild]

Thanks a bunch. Power now working. It was an inline fuse. Replaced the fuse and all is well.
Certainly appreciate the response.

[PARAPTOR]

Thanks for getting back to us with your findings. This is how we learn from each other. Again Thanks