I agree, "if only Keystone could provide us with an "after the sale retrofit kit"...
But I'd suspect that won't ever happen, primarily for two reasons:
1. It wouldn't be profitable for Keystone
2. It would be "nearly impossible" to build such a "bolt on kit" given the wide variety of wheelwell configurations. Between the outriggers that support the "box structure of the living quarters" to the variability of measurements between models, they'd have to "build a unique kit for nearly every model in the line.
Given that there are so many models in the 17 brand offerings, assuming there were 10 models in each brand, that would mean 170 "retrofit kits" for each year. Even if half would interchange between models and between years, that still would be an "insurmountable inventory of retrofit kits"....
Don't count on that happening. Now, as for "providing the materials so a dealer or a customer could custom fit their model wheelwell area".... Just the shipping of "large size 4x8 sheets" would make the cost so high at the dealership that most people would abandon buying it there and opt for the same or similar materials at Lowe's or Home Depot or a similar building supply store..... The "truck freight charges" is the primary reason why Trekwood.com is so expensive with nearly all of their "unique trailer parts delivery charges".
So, for those reasons, I wouldn't look for any solutions from Keystone except for the few "complete floor rebuilds done at the factory" or "in warranty patch jobs done at the dealership".
Ironically, it's not getting any better, even with the "newest line of luxury trailers from Keystone".... The Acadia models have a waterproof material to replace the DARCO liner in the wheelwells, but because of weight restrictions, that "plastic sheeting" is still not able to withstand a tire blowout or, IMO, survive towing on gravel roads for the lifetime of the trailer.
So, the problem of damaged wheelwells, wet insulation, deterioration of floors will continue, even with the "latest and greatest" from Keystone....
Grandpa used to say, "If you want it done right, do it yourself"....
Since I've been "labeled an old codger" by some, Today Grandpa's advice rings as true as it did, "back when".....
If you have any problems or run into any questions about modifying your wheelwells, just ask. It's not particularly technically challenging to do, just difficult to find the sheets and to cut/fit the panels in place around the outriggers that are present in every wheelwell..
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|