Auto-leveling panel

[Salsaman1a]

FYI, thought I would share my experience with the group.
So, I made it to the campsite, lowered my from two stabilizer legs so I could disconnect my kingpin from the truck. One unhooked, walk back to the 5th wheel to hit the auto leveling button on the panel. The panel was blank/off so I hit the one bottom and nothing happened. I began hearing a clicking sound emitting from the from panel. It seemed to be coming from behind the battery near two connector junctions. I put my hand on one of them to feel any vibration from the clicking, nothing. Put hand on the other one and bingo. Found it. I took it apart and found that it is a 30amp reset breaker.
Luckily there was an RV shop close by and bought two breakers for $11. I replaced it with a 50amp and back in business

[Salsaman1a]

Here is a visual

[chuckster57]

If it does it again, get an 80A circuit breaker, and wire it directly to the battery. That is Lippert’s advise.

https://www.amazon.com/Tocas-Circuit...dDbGljaz10cnVl