|
02-09-2012, 08:54 AM
|
#1
|
Member
Join Date: Jan 2012
Location: Indiana
Posts: 51
|
Electric Awning
When i extend the awning it goes good after retracting it i saw the bars dont overlap when it gets all the way up now if i pull it a little over they seem to line up and goes like it should is there away to adjust the side to side on it that anyone knows of are should i just bend the bar out so it can overlap it? It is on a 2010 Sprinter 318FLS
|
|
|
02-09-2012, 11:58 AM
|
#2
|
Senior Member
Join Date: Jan 2011
Location: wv
Posts: 504
|
You can move the fabric in the rail mounted to the TT. A very little bit goes a long way.
__________________
2002 Chevy Avalanche 5.3 k&n cold air intake
2011 keystone hideout 26b
New tv 2005 dodge lb ctd quad cab
New TT 2014 j@%$O 32BHDS
|
|
|
02-09-2012, 05:35 PM
|
#3
|
Senior Member
Join Date: Mar 2011
Location: Washington State
Posts: 859
|
Quote:
Originally Posted by 2011 keystone
You can move the fabric in the rail mounted to the TT. A very little bit goes a long way.
|
2011 Keystone is right, after you move the fabric in the direction you need to move the arms, put a screw in the track at both ends, it will never be out of align again. Note: it is best to slide the fabric in the rail when awning is out. Happy Campin.............Ron
__________________
Ron
99 Freightliner FL70 Western Hauler CC 300 HP Cat/Chipped/ Allison Auto
12 Montana 3800RE/Level-Up Auto Leveling/Slide Toppers/MorRyde Hitch/VuQube 2000
01 F350 7.3 PSD Crew Cab DRW 4X4 6 Speed/Chipped
|
|
|
02-10-2012, 05:42 AM
|
#4
|
Member
Join Date: Jan 2012
Location: Indiana
Posts: 51
|
hanks
ok that makes sense i thought maybe the arms were bent after that makes sense once it warms up i will try and pull that awing fabric over a little like i say the bars almost over lap now so it wont take much just noticed when i put up it was not in the grove on both side at top
|
|
|
02-10-2012, 05:45 AM
|
#5
|
Member
Join Date: Jan 2012
Location: Indiana
Posts: 51
|
Quote:
Originally Posted by Ron
2011 Keystone is right, after you move the fabric in the direction you need to move the arms, put a screw in the track at both ends, it will never be out of align again. Note: it is best to slide the fabric in the rail when awning is out. Happy Campin.............Ron
|
so you are saying get lined up then put screw in the channel to keep fabric from moving right?
|
|
|
02-10-2012, 10:19 AM
|
#6
|
Senior Member
Join Date: Jan 2011
Location: wv
Posts: 504
|
Quote:
Originally Posted by Fireman640
so you are saying get lined up then put screw in the channel to keep fabric from moving right?
|
Yes put screws in after yoy adjust it.
__________________
2002 Chevy Avalanche 5.3 k&n cold air intake
2011 keystone hideout 26b
New tv 2005 dodge lb ctd quad cab
New TT 2014 j@%$O 32BHDS
|
|
|
05-02-2012, 03:01 PM
|
#7
|
Junior Member
Join Date: May 2012
Location: Alabama
Posts: 2
|
I have a 2012 Sprinter 310KBS that was delivered last Monday and everything worked when the salesman went over it with me. I tried to open my electric awning and it will not work. It will blow the 15 amp fuse when I try to open it. Does anybody have this problem?
|
|
|
05-02-2012, 07:23 PM
|
#8
|
Senior Member
Join Date: May 2010
Location: Rochester, NY
Posts: 1,605
|
Quote:
Originally Posted by Ron
2011 Keystone is right, after you move the fabric in the direction you need to move the arms, put a screw in the track at both ends, it will never be out of align again. Note: it is best to slide the fabric in the rail when awning is out. Happy Campin.............Ron
|
X2- I did the same with mine. No alignment problem since I put set scews in the ends of the fabric bead.
|
|
|
05-03-2012, 04:15 AM
|
#9
|
Member
Join Date: Jan 2012
Location: Indiana
Posts: 51
|
Quote:
Originally Posted by scottiedog1
I have a 2012 Sprinter 310KBS that was delivered last Monday and everything worked when the salesman went over it with me. I tried to open my electric awning and it will not work. It will blow the 15 amp fuse when I try to open it. Does anybody have this problem?
|
Does it even move at all? it seems like it is stuck when i first went to open mine i had to hit the rails they was in a bind that freeed it up hope this helps
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 02:04 AM.