 |
|
06-07-2022, 04:23 PM
|
#21
|
|
Senior Member
Join Date: Jan 2014
Location: Winnipeg, Canada
Posts: 1,196
|
Quote:
Originally Posted by NH_Bulldog
I use magnets secured with 3M VHB adhesive. I did this when I removed the gas strut that held mine open so I could install MorRyde steps. Two magnets secure the door and it has never blown closed.
AP Products 013-09802 Magnetic Door Hold Backs, Black https://www.amazon.com/dp/B01N63U2UZ...ing=UTF8&psc=1 |
Never seen these before. Thanks for posting.
When you say you used two magnets to secure the door, do you mean two pairs of magnets?
Can you post a picture showing the location they were installed?
__________________
2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride)
2015 F250 XLT SB Crew, 6.2l gas
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|
|
|
|
06-07-2022, 05:00 PM
|
#22
|
|
Senior Member
Join Date: Apr 2019
Location: Henniker
Posts: 2,141
|
It is a set of two magnet pairs. I circled them in the picture. They have a rubberized coating so no rust, They are low profile, and they are just the right amount of strong.
|
|
|
|
|
06-07-2022, 05:12 PM
|
#23
|
|
Senior Member
Join Date: Feb 2021
Location: Suwanee
Posts: 414
|
Quote:
Originally Posted by bsmith0404
No, something like this.
|
Dave,
I have 1 of these. I will send it to you if you want it. I bought a 2 pack before realizing that ours has a gas strut on the bottom of the door. Been in my storage space for a year. Pm me if you want it.
|
|
|
|
|
06-07-2022, 06:56 PM
|
#24
|
|
Senior Member
Join Date: Jan 2014
Location: Winnipeg, Canada
Posts: 1,196
|
Quote:
Originally Posted by NH_Bulldog
It is a set of two magnet pairs. I circled them in the picture. They have a rubberized coating so no rust, They are low profile, and they are just the right amount of strong.
|
Thanks for the image.
__________________
2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride)
2015 F250 XLT SB Crew, 6.2l gas
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|
|
|
|
|
06-07-2022, 07:23 PM
|
#25
|
|
Member
Join Date: Apr 2022
Location: Lakewood
Posts: 94
|
Quote:
Originally Posted by NH_Bulldog
It is a set of two magnet pairs. I circled them in the picture. They have a rubberized coating so no rust, They are low profile, and they are just the right amount of strong.
|
^^^This is what I did as well. Took gas strut off and now door opens 180 degrees.
Also on my outside kitchen door they had a 90's manual springer loaded latch that was a pain to do. Took it off, applied white silicone in the mounting holes and 3M'd a magnetic latch on both sides of the access door. Easy mod...
__________________
2018 Passport Grand Touring 2400BH
2014 F150 FX4
|
|
|
|
|
06-07-2022, 07:41 PM
|
#26
|
|
Member
Join Date: Feb 2022
Location: Kalkaska
Posts: 68
|
I bought these magnetic things for my door but the door don't open far enough for them to connect to each other. Had to send them back. they are only 2 1/2 inches between both of them. so be careful before you order them. j.s.
__________________
2019 Chevy Silverado 3500 6.6 Diesel
2022 Keystone Cougar 364BHL
Goosebox Gen 3
|
|
|
|
|
06-08-2022, 05:18 AM
|
#27
|
|
Senior Member
Join Date: Sep 2020
Location: jackson
Posts: 1,122
|
I actually have the opposite problem with my trailer...the hinges are so tight I don't think anything will close them!
__________________
JXNBBL (Jay)
Jackson, NH
2021 Keystone 330BHS
2023 Ram 3500 6.7L diesel, 3.73 ratio
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 06:41 PM.
Linear Mode
