|
10-08-2021, 11:23 AM
|
#1
|
Senior Member
Join Date: Aug 2020
Location: Upper Chesapeake Bay
Posts: 4,837
|
Window seal repair
So I just noticed the window seal for the kitchen window is not in place on the corner…what’s the best way to seat it properly?
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
|
|
|
10-08-2021, 01:38 PM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,349
|
I use soapy water and a plastic windshield tool. Odds are it is shrinking and will happen again. That isn’t the “seal” it’s just an insert molding.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
10-08-2021, 01:50 PM
|
#3
|
Senior Member
Join Date: Aug 2020
Location: Upper Chesapeake Bay
Posts: 4,837
|
Quote:
Originally Posted by chuckster57
I use soapy water and a plastic windshield tool. Odds are it is shrinking and will happen again. That isn’t the “seal” it’s just an insert molding.
|
Ok well if it’s just cosmetic I can live with it for now..will try and reseat it with soapy water and see if it stays
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
|
|
|
10-16-2021, 05:33 AM
|
#4
|
Senior Member
Join Date: Oct 2021
Location: Ogden
Posts: 138
|
It’s not just cosmetic, the pressure applied by the rubber seal is what holds the glass in place. If it falls out completely the glass will also, if it fallows standard vehicle glass similarly installled
__________________
2017 Silverado 3500Hd duramax
2008 keystone raptor Max -3712-TS
Anderson ultimate hitch
|
|
|
10-16-2021, 05:38 AM
|
#5
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,467
|
Quote:
Originally Posted by bigdave_185
It’s not just cosmetic, the pressure applied by the rubber seal is what holds the glass in place. If it falls out completely the glass will also, if it fallows standard vehicle glass similarly installled
|
bigdave_185, Chuck is a professional rv tech. I had this issue on my old 2002 and completely removed that trim and the window can't fall out. It is cosmetic and sits in a channel and as it ages, will pull out of the channel. Mine had pieces missing (wasn't all the way around) and gaps and I replaced the stuff. I found it a pain in the butt but mine looked so bad I kind of felt it needed to be done.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
10-16-2021, 06:09 AM
|
#6
|
Senior Member
Join Date: Oct 2021
Location: Ogden
Posts: 138
|
Window seal repair
I’ll go take a picture of my trailer window and see what ya think, the one I just purchased it’s falling out all around also and I can see the glass edge.
__________________
2017 Silverado 3500Hd duramax
2008 keystone raptor Max -3712-TS
Anderson ultimate hitch
|
|
|
10-16-2021, 06:38 AM
|
#7
|
Senior Member
Join Date: Oct 2021
Location: Ogden
Posts: 138
|
This is mine and I was worried it would fall out
__________________
2017 Silverado 3500Hd duramax
2008 keystone raptor Max -3712-TS
Anderson ultimate hitch
|
|
|
10-16-2021, 06:46 AM
|
#8
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,349
|
Quote:
Originally Posted by bigdave_185
|
If you look close you should see the adhesive behind the glass. remove it and have someone press, NOT PUSH on the glass from the inside, it should stay in place.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
10-16-2021, 06:49 AM
|
#9
|
Senior Member
Join Date: Oct 2021
Location: Ogden
Posts: 138
|
Fair enough. Any tips besides a plastic body clip tool and some soapy water? Probably better results when there isn’t frost on my trailer lol
__________________
2017 Silverado 3500Hd duramax
2008 keystone raptor Max -3712-TS
Anderson ultimate hitch
|
|
|
10-16-2021, 07:04 AM
|
#10
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,349
|
Its been a while but as I recall its easier to start with one edge in and then press the other edge in, I just dont remember which edge
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|