|
|
02-28-2020, 08:45 AM
|
#21
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,752
|
I should have added that the "more economical" led's do a poorer job of producing "white light". Typically you get what you pay for in that sort of product. The led conversions that I did on my clearance lights are these:
https://www.etrailer.com/Accessories...hoC1g0QAvD_BwE
They were more expensive than just a led bulb but the design of the these lights have a very limited space for the lamp. I drive with my running lights on during the day (I figure the more visual the less chance of being hit) but with the original incandescents during the day I could not tell they were on. The led retrofit made them visible in the daylight so it was worth the money for me.
I replaced the roof top cab lights on my TV with smoked lenses because I thought they looked better. What I noticed was, the kits for the amber lenses also came with amber leds. https://gorecon.com/product/ford-99-...r-xenon-bulbs/
To each his own, I've bought cheal led's and replaced the interior lights and spent too much time "tapping the lenses to get them to come on or removing the lenses and "playing with the lamp to get it to stay on. I replaced them with a little more expensive led (not ridiculous) and the issue went away. The "junk" replacement led's can wreak havoc on television interference, radio reception, have even seen reports of some trucks throwing trouble codes and going into "limp home" mode due to poorly built led's.
I'd urge anyone considering replacements to do your homework. When the led craze first hit there was a proliferation of junk leds being sold at greatly reduced costs. Afterall, why pay $15 for one led lamp when this guy on Ebay will sell me a dozen for that price? So folks would by them, plug them in an post a review "They work great" very few would come back days, weeks or longer and say "I got ripped off". Nowadays there a lot more resources for getting the information on who's making them, independent testing, etc.
JMHO
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
02-28-2020, 09:10 AM
|
#22
|
Senior Member
Join Date: Oct 2016
Location: Commerce Twp, Mi
Posts: 1,002
|
__________________
TOM
2011 Chevy Silverado
1500, HD Tow Package
2017 Keystone Hideout 177LHS Carlisle Radial HDs
:
|
|
|
02-28-2020, 09:18 AM
|
#23
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,752
|
Quote:
Originally Posted by CrazyCain
|
Not at all, it's more like a sub vs a hoagie!
I think it's totally interchangeable not including "daytime running lights". I think of clearance lights vas the the red and amber lights that the DOT require with the number and placement dictated on the dimensions of the vehicle.
One other term that depending on your age one might recognize or not and that's the "parking lights". Rarely referred to these days.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
02-28-2020, 10:01 AM
|
#24
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
DOT has a name for each placement of a light, but slang works for most. More important is what DOT says about location colors. Red always rear unless its is a turn signal those can be amber and back ups white. Headlights white, all other lights must be amber and no other color. Guys around here are putting on clear cab clearance lights which is illegal. Some put blue or green on front in the newer LED headlights that's also illegal.
In my experience most get a warning, but its PC to stop Comm Trucks and conduct a full roadside inspection.
I forgot red can be on the sides only close to the rear. There is XX inches away from rear allowed, I cannot remember that distance rule.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
02-28-2020, 10:51 AM
|
#25
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by KimNTerry
I understand about fitting in the enclosure. Please explain why White lights are not suitable under the colored lenses.
|
Quote:
Originally Posted by NH_Bulldog
I am interested in this reasoning as well. Any vehicle I have ever owned with factory LED lights (or any light for that matter), whether car, truck, motorcycle or RV has had white light behind a colored lens, except where the lens itself was clear in which case the bulb or LED was colored.
|
Quote:
Originally Posted by flybouy
|
Hopefully Marshall's link answered your questions??? It's more a "light spectrum difference" between LED's and Incandescent light output".....
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
02-28-2020, 12:33 PM
|
#26
|
Senior Member
Join Date: Oct 2016
Location: Commerce Twp, Mi
Posts: 1,002
|
Quote:
Originally Posted by flybouy
Not at all, it's more like a sub vs a hoagie!
I think it's totally interchangeable not including "daytime running lights". I think of clearance lights vas the the red and amber lights that the DOT require with the number and placement dictated on the dimensions of the vehicle.
One other term that depending on your age one might recognize or not and that's the "parking lights". Rarely referred to these days.
|
Wow, have not heard that in some time!!!! Thanks for the insight
__________________
TOM
2011 Chevy Silverado
1500, HD Tow Package
2017 Keystone Hideout 177LHS Carlisle Radial HDs
:
|
|
|
03-01-2020, 04:44 AM
|
#27
|
Junior Member
Join Date: Feb 2020
Location: Broadabin
Posts: 16
|
Have yet to get battery load tested. All lighting on camper is LED.
__________________
Bob Hartman
Keystone Premier 30RI
Ram 1500 Classic 5.7 Hemi
|
|
|
03-01-2020, 07:02 AM
|
#28
|
Senior Member
Join Date: Sep 2019
Location: Florissant
Posts: 702
|
I have struggled with LED assemblies behind stock lenses on my motorcycle because they are so directional with the emitted light. For marker lights or tail lights (especially) on an RV I would not just buy the bulbs to use behind the stock lens. Also, white LEDs can look white even when shinning through a colored lens.
__________________
Skids
2019 Bullet 248RKS
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|