|
01-31-2012, 06:02 PM
|
#1
|
Senior Member
Join Date: Dec 2011
Location: Dayton
Posts: 175
|
Faux Rock Wall Surround
I've been planning this mod for several weeks and finally received the panels from TexturePlus. I used the fire rated, interlocking stacked stone pattern in natural grey. This project wasn't cheap, each panel costs $63.95 and oversize shipping added another $50.00. However, I'm very pleased with the results.
The fire rated panels are designed for installation around fireplaces, so should be fine around the stove. The panels are made from a molded polymer foam that's easily cut using a keyhole saw with a hack saw blade. I block sanded the edges using medium grit sandpaper for a custom fit. The 2 ft x 4 ft panels were cut approximately in half for a total installed weight of about 3.5 lbs.
__________________
J. B. Smith
Dayton, OH
2012 Keystone Cougar 331MKS
2018 RAM 3500 Laramie 6.7L DRW
B&W Companion
|
|
|
01-31-2012, 06:36 PM
|
#2
|
Senior Member
Join Date: Jan 2012
Location: Coldwater, Mi
Posts: 386
|
Very nice, looks awesome.
|
|
|
01-31-2012, 07:06 PM
|
#3
|
Senior Member
Join Date: Aug 2011
Location: Puyallup, Wa
Posts: 121
|
Great job!! Looks great, how did you attach to the wall?
__________________
2008 F350 4x4 LB CC 6.4 twin turbo PSD
Prodigy P2 brake controler
Hijacker 16K Double pivot ultra
2007 Montana Mountaineer 307RK
New to us on 8/12/2011:
|
|
|
01-31-2012, 07:16 PM
|
#4
|
Senior Member
Join Date: Apr 2011
Location: Arrey,
Posts: 2,368
|
jbsmith, Howdy;
How easy or not is it to keep clean what with grease splatters and other such stuff ??
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.
|
|
|
01-31-2012, 07:33 PM
|
#5
|
Senior Member
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
|
Wow! Nice! And lightweight, to boot! That’s the type of mod I like: impressive looks without much weight. Makes the trailer more homey.
__________________
-Scott, DW, DG, DB, and DD
2011 Passport 2590BH
2009 Ford F150 SuperCrew F X4 5.4L w/Max Tow
|
|
|
01-31-2012, 07:39 PM
|
#6
|
Senior Member
Join Date: Dec 2011
Location: Dayton
Posts: 175
|
Quote:
Originally Posted by Hunter757
Great job!! Looks great, how did you attach to the wall?
|
I was meticulous in cutting and shaping the panels to fit very tight. I haven't permanently attached them yet, and am considering several semi-permanent options. Whatever I use will allow me to remove the panels with minimal damage to the wall.
The two panels are bonded together into a single assembly using polyurethane glue. The complex shape cut to fit around the cabinet and vent hood has it locked in place pretty tight. I might just let friction take care of things along the top edge and pop a few small screws along the bottom.
Sent from my iPad using Tapatalk
__________________
J. B. Smith
Dayton, OH
2012 Keystone Cougar 331MKS
2018 RAM 3500 Laramie 6.7L DRW
B&W Companion
|
|
|
01-31-2012, 07:54 PM
|
#7
|
Senior Member
Join Date: Dec 2011
Location: Dayton
Posts: 175
|
Quote:
Originally Posted by hankaye
How easy or not is it to keep clean what with grease splatters and other such stuff ??
|
The vendor claims the panels may be wiped down with a damp cloth and mild soap/detergent like Simple Green. The panels have a paint like coating on them that's like a plastic shell. It seems to be pretty tough material.
The range is mostly for looks anyway...not much cooking. That's what the microwave and gas grill are for. I'll be adding a bi-fold cover to the cooktop which doubles as a splatter guard just in case.
Sent from my iPad using Tapatalk
__________________
J. B. Smith
Dayton, OH
2012 Keystone Cougar 331MKS
2018 RAM 3500 Laramie 6.7L DRW
B&W Companion
|
|
|
02-01-2012, 04:00 AM
|
#8
|
Member
Join Date: Jun 2011
Location: Houston, TX
Posts: 38
|
Have you thought about using a few Velcro pads to help hold in place?
Looks GREAT!
Sent from my Kindle Fire using Tapatalk
|
|
|
02-01-2012, 04:09 AM
|
#9
|
Senior Member
Join Date: Jun 2011
Location: Sulphur, La
Posts: 346
|
Now you're Mod'n. Very nice.
__________________
Michol02
2012 Cougar 32SAB
2013 Chevy 2500 HD
Visit Mods album in my profile
|
|
|
03-15-2012, 01:10 AM
|
#10
|
Junior Member
Join Date: Jan 2012
Location: Ohio
Posts: 11
|
I just purchased a product called Nextstone the website is listed below. I am installing a fireplace in my 2005 Cougar. I will post before and after photos in the next couple of weeks (I hope). Check the site out.
http://nextstone.com/
|
|
|
03-15-2012, 02:22 AM
|
#11
|
Member
Join Date: Nov 2011
Location: Reynoldsburg, Ohio
Posts: 84
|
Great job!!
Mark
__________________
2008 F-350 Dually
2012 Keystone Avalanche 330RE
2007 Harley Davidson Ultra
2000 Softail Springer
|
|
|
03-15-2012, 02:23 AM
|
#12
|
Permanent User Ban
Join Date: Mar 2012
Location: Bartlesville, Oklahoma
Posts: 1,124
|
Wow that look great!!!
I too share the concern for the cleaning aspect because of the 'gritty' texture. Even though it's coated with something so it's easy to wipe down, goo will end up getting in the texture and not be easy to wipe off. Like you said though, if you don't cook much, this may not be an issue for you.
Have you considered mounting the "rock wall" to some sort of backer board and then hanging the backer board on the wall? Could design it in such a way that it would look exactly like it does now, and could remove easily like you said you wanted.... Added benefit, would be easier to clean crevices if you don't have to stoop and reach.
Wanna make mine??
|
|
|
03-15-2012, 02:52 AM
|
#13
|
Senior Member
Join Date: Dec 2011
Location: Dayton
Posts: 175
|
Quote:
Originally Posted by SAD
I too share the concern for the cleaning aspect because of the 'gritty' texture.
|
Our range cover folds up and does a nice job of protecting the wall. I'm not terribly worried about cleaning the panels. I tried several cleaners on samples of the material and it seems to hold up fine. The texture isn't really "gritty" it's more like a hard plastic shell over the polyurethane foam. You can order free samples from the vendor.
Quote:
Originally Posted by SAD
Have you considered mounting the "rock wall" to some sort of backer board
|
The polyurethane foam material is already bonded to a denser core material on the back of the panel. I've already mounted the panels to the wall using six coarse thread drywall screws. The screws are countersunk into the panels and then filled with color matched putty.
__________________
J. B. Smith
Dayton, OH
2012 Keystone Cougar 331MKS
2018 RAM 3500 Laramie 6.7L DRW
B&W Companion
|
|
|
03-15-2012, 02:59 AM
|
#14
|
Permanent User Ban
Join Date: Mar 2012
Location: Bartlesville, Oklahoma
Posts: 1,124
|
Quote:
Originally Posted by jbsmith
Our range cover folds up and does a nice job of protecting the wall. I'm not terribly worried about cleaning the panels. I tried several cleaners on samples of the material and it seems to hold up fine. The texture isn't really "gritty" it's more like a hard plastic shell over the polyurethane foam. You can order free samples from the vendor.
The polyurethane foam material is already bonded to a denser core material on the back of the panel. I've already mounted the panels to the wall using six coarse thread drywall screws. The screws are countersunk into the panels and then filled with color matched putty.
|
Thanks for the clarifications... But you failed to address my final concern...
Quote:
Originally Posted by SAD
Wanna make mine??
|
|
|
|
03-30-2012, 03:32 PM
|
#15
|
Junior Member
Join Date: Jan 2012
Location: Ohio
Posts: 11
|
Latest update
Well foks we bought the Faux stone fireplace and all. And then I realized there are braces that are structured into the Cougar that blocks me from installing the fireplace. Oh well the Cougar looked great when we bought It and we are very happy either way. I do have a very nice Dimplex fireplace for sale on the forum if anyone is interested.
Pm me if interested.
God bless.
|
|
|
03-30-2012, 04:49 PM
|
#16
|
Member
Join Date: Jun 2010
Location: NW Alabama
Posts: 84
|
That looks great. I like our camper but some of the interior looks cheapy, something like that could dress it up nicely.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|