|
08-10-2020, 04:49 PM
|
#1
|
Member
Join Date: Nov 2019
Location: Saint Marys
Posts: 66
|
Where are the GFI outlets?
I have a Montana 3930 FB and I can’t find the GFI outlet for the Kitchen. All my outlets in the kitchen and living room are out. There is a GFI outlet in the half bath, but it is not tripped. All the outlets in the bedroom and bathroom work.
Thank you for any help that you can offer.
|
|
|
08-10-2020, 06:23 PM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,341
|
I have no idea, but I would look under the counter.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-11-2020, 04:38 AM
|
#3
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,462
|
The GFCI outlets are on their own breaker; did you open your converter and push the GFCI breaker all the way down and then push back up. They sometimes don't look like they are tripped when they actually are.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
08-11-2020, 05:06 AM
|
#4
|
Member
Join Date: Nov 2019
Location: Saint Marys
Posts: 66
|
That did the trick for the outlets that are marked GFI protected, however the other plugs inside the kitchen and living area are still not working, but they are on the same double pole breaker as the GFI. Since that is a double pole breaker with 15 A on one side and 20 A on the other, is it possible that the other half of that breaker that is non-GFI outlets may have blown and needs to be replaced?
|
|
|
08-11-2020, 05:11 AM
|
#5
|
Member
Join Date: Nov 2019
Location: Saint Marys
Posts: 66
|
Is there a way to pull out that breaker and test it with and electrical meter for continuity?
|
|
|
08-11-2020, 05:17 AM
|
#6
|
Member
Join Date: Nov 2019
Location: Saint Marys
Posts: 66
|
I think I use the wrong terminology for what I thought was a double pole breaker, but I think they call it a tandem breaker that has two different circuits on one breaker.
|
|
|
08-11-2020, 05:22 AM
|
#7
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,341
|
If your comfortable with a Volt/Ohm meter and working around live AC circuits, you can easily test for voltage at the breaker. Negative lead to ground bar, positive to the black lead at the breaker
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-11-2020, 05:47 AM
|
#8
|
Member
Join Date: Nov 2019
Location: Saint Marys
Posts: 66
|
I assume the breaker itself needs to be in the on position, correct? Nothing ventured, nothing gained, so I will just be very careful.
|
|
|
08-11-2020, 06:22 AM
|
#9
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,462
|
That is correct. If the breaker is turned to the off position, no positive voltage will be on the black wire. The white wire from the breaker is tied to that bar in the converter with all the others. Put your meter on AC and in a scale range where it can read the 117V you should be seeing. Careful where you touch things.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
08-11-2020, 11:51 AM
|
#10
|
Member
Join Date: Nov 2019
Location: Saint Marys
Posts: 66
|
I was very excited at the prospect that my problem might lie with a bad circuit breaker, but no such luck. I had 124+ volts going to all the breakers. That I could’ve fixed with confidence. Please keep the ideas coming, as I am happy to check on anything that you guys might come up with.
|
|
|
08-11-2020, 12:08 PM
|
#11
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Still sounds like a GFCI tripped. Look outside, in the storage compartment, or outside behind the fridge.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
08-11-2020, 01:08 PM
|
#12
|
Senior Member
Join Date: Dec 2019
Location: Trinidad,TX
Posts: 975
|
Quote:
Originally Posted by travelin texans
Still sounds like a GFCI tripped. Look outside, in the storage compartment, or outside behind the fridge.
|
X2. I suspect you have another GFCI outlet that is tripped. They can be in unsuspected places.
__________________
Woody
Cedar Creek Lake, Texas
2019 Laredo 290 SRL
2019 Ram 2500, 4x4, Cummins diesel
Andersen hitch
|
|
|
08-11-2020, 02:46 PM
|
#13
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,462
|
Quote:
Originally Posted by CedarCreekWoody
X2. I suspect you have another GFCI outlet that is tripped. They can be in unsuspected places.
|
GFCI outlets are located so that the unwitting are unlikely to stumble on them. Some are on the outside AC receptacle. It would be cruel to put one on the refrigerator outlet.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
08-11-2020, 03:13 PM
|
#14
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,751
|
Also check the gfi outlets that are working. They “daisy chain” from one outlet to another so the outlet can work but if a wire pulls off the other side, the load side then everything down stream will be dead.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
08-11-2020, 03:13 PM
|
#15
|
Senior Member
Join Date: Dec 2019
Location: Trinidad,TX
Posts: 975
|
As i think about this i think we may be chasing tbe wrong solution. Ive never known the fridge to be on a GFCI circuit (although I could be wrong about that.) I think you may have a break in a circuit somewhere. You may have to start pulling outlets after verifying you have power coming out of the outlets.
__________________
Woody
Cedar Creek Lake, Texas
2019 Laredo 290 SRL
2019 Ram 2500, 4x4, Cummins diesel
Andersen hitch
|
|
|
08-11-2020, 06:28 PM
|
#16
|
Member
Join Date: Dec 2018
Location: Carmichael
Posts: 93
|
Be sure to check the wiring diagram so you check the outlets in sequence.
Oh, that's right - there are no wiring diagrams!
|
|
|
08-19-2020, 03:02 PM
|
#17
|
Member
Join Date: Aug 2020
Location: Blossburg
Posts: 39
|
Quote:
Originally Posted by Benbill
I have a Montana 3930 FB and I can’t find the GFI outlet for the Kitchen. All my outlets in the kitchen and living room are out. There is a GFI outlet in the half bath, but it is not tripped. All the outlets in the bedroom and bathroom work.
Thank you for any help that you can offer.
|
All my kitchen outlets were put. Found out all kitchen and outside outlet as well as bathroom outlet are all wired to one giving outlet instead of having individual gfci outlets. Mine was located in bathroom. Hit test button to make it pop and reset it. All outlets now work
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|