Which breaker is which re 50->80
I have read here that the breaker for the hydraulic system is too small, Keystone has advised to upgrade from 50 to 80 amps. While I am in there I am going to upgrade the other to a regular breaker as well, what size should that one be? The wire running off to the left is the main positive from the battery bank, the wire going straight up goes to the hydraulic pump.I assume the wire going straight down is the main positive DC going to the main power panel.I think I read somewhere that the breaker on the right that is lightly wired is a 30Amp. Can anyone shed some light on this?
|