|
07-10-2021, 01:45 PM
|
#1
|
Junior Member
Join Date: Jun 2020
Location: LINCOLN
Posts: 20
|
Outback 325bh 2nd AC unit
Our Outback 325bh is pre wired for a 2nd AC unit, not sure if that's standard, anyway the current AC unit is a Coleman Mach 15 and it's wired to a thermostat. My question is if we add the 2nd unit can it be wired to run on the same thermostat? Would I need a 2nd thermostat? Everything I've researched so far shows 2nd unit is controlled by the piece you mount inside the camper (forgot what it's called). I would rather have a thermostat vs having to go into the bedroom everytime we wanted the 2nd unit to run.
|
|
|
07-10-2021, 01:49 PM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,353
|
Do you have in command? If so you’ll need the gateway.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
07-10-2021, 02:59 PM
|
#3
|
Junior Member
Join Date: Jun 2020
Location: LINCOLN
Posts: 20
|
Yes we do!
|
|
|
07-13-2021, 05:27 AM
|
#4
|
Member
Join Date: Mar 2021
Location: Gilbertsville
Posts: 33
|
I just finished this project and we own the same model (2018). Unless yours is different, the second AC is in the master bed and is direct vent meaning you just get controls in the ceiling. So unless you choose to install your own T-Stat and fish a wire to the wall, it is just simple ceiling controls. Heading to SC on Friday so we are excited to finally have the second AC installed.
One other note to consider.. Our 325BH came with standard AC vents in the ceiling that cannot be closed. For $10-15 each I replaced the bedroom and bathroom with vents that can be closed so that when we are running both AC's the original pushes more air to the living and bunk areas. Now these new vents still let through plenty of air so it's not perfect, but it should create enough back pressure to push more air the other way. Very simple replacement.
If you are doing this yourself, take your time. Getting the unit onto the roof is the toughest part. 90lbs is quite heavy when you are trying to lift it 11-12', but my wife and I got it up there by having her pull a rope from the roof while I pushed it up a ladder.
|
|
|
07-13-2021, 07:07 AM
|
#5
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Quote:
Originally Posted by kfp673
I just finished this project and we own the same model (2018). Unless yours is different, the second AC is in the master bed and is direct vent meaning you just get controls in the ceiling. So unless you choose to install your own T-Stat and fish a wire to the wall, it is just simple ceiling controls. Heading to SC on Friday so we are excited to finally have the second AC installed.
One other note to consider.. Our 325BH came with standard AC vents in the ceiling that cannot be closed. For $10-15 each I replaced the bedroom and bathroom with vents that can be closed so that when we are running both AC's the original pushes more air to the living and bunk areas. Now these new vents still let through plenty of air so it's not perfect, but it should create enough back pressure to push more air the other way. Very simple replacement.
If you are doing this yourself, take your time. Getting the unit onto the roof is the toughest part. 90lbs is quite heavy when you are trying to lift it 11-12', but my wife and I got it up there by having her pull a rope from the roof while I pushed it up a ladder.
|
I paid an independent rv repair guy $200 to install mine while I sat in the shade and enjoyed a cool drink. 😜
Much easier on the back...
|
|
|
07-13-2021, 09:03 AM
|
#6
|
Member
Join Date: Mar 2021
Location: Gilbertsville
Posts: 33
|
Quote:
Originally Posted by Javi
I paid an independent rv repair guy $200 to install mine while I sat in the shade and enjoyed a cool drink. 😜
Much easier on the back...
|
Wow, that’s a no brainer for sure! I would have happily paid $200 but my dealer wanted something like $4-600 to do the job and it’s really not that difficult other than the lifting.
|
|
|
07-13-2021, 10:05 AM
|
#7
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Quote:
Originally Posted by kfp673
Wow, that’s a no brainer for sure! I would have happily paid $200 but my dealer wanted something like $4-600 to do the job and it’s really not that difficult other than the lifting.
|
Some of the best advice I can give to new rv people is to find a good local rv repair person and get to know them well. They don't sell RV's and only get paid for their time. They are usually much less expensive and much quicker to complete the work.
Remember they are not doing make ready for trailers they sold yesterday.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 06:16 AM.