Connected to a powered shore source and no 120VAC plugs in rig are working??Remember lights in your rig are 12 VDC and are either supplied by your battery when not connected to shore power or when connected to shore power your converter. if not connected to shore power make sure your Battery is not disconnected via the battery disconnect switch. I would start debugging with shore power connected, make sure you have power from that source. If you have NO 120VAC plugs working check the main breaker in the power distribution panel (breakers like you have in your stick house)
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)
|