|
05-20-2021, 08:50 AM
|
#1
|
Junior Member
Join Date: Mar 2020
Location: marysville
Posts: 10
|
I did something stupid with my black tank
So I was flushing out my black tank after I emptied it with the installed black tank cleaner on my BH312 that I hook the hose to on the side of my rig. I forgot to open the drain valve and overflowed the tank. So there was sewer water trapped between the floor and the plastic sheet that shields the underside of the camper. I took down the plastic sheeting and got all the nasty water out and hosed it out, sprayed with bleach to kill any bacteria etc. but now we get an occasional drip when to waste water is going into the black tank.
my question is, is there a check valve or anything on the tank that may have been damaged when it was overfilled. Is there anything that could be stuck? I still have the black plastic sheeting off and we will get a sewer smell every now and then. Any thoughts?
|
|
|
05-20-2021, 09:50 AM
|
#2
|
Senior Member
Join Date: Feb 2013
Location: Lacey, WA
Posts: 499
|
I think that as long as the vent pipe ( the one that goes through the roof) isn't plugged.... you can't over pressurized the black tank.... Water would just flow out the vent pipe.
__________________
Lee
1970 F250 Highboy 4x4
2013 Cougar 21RBSWE
|
|
|
05-20-2021, 10:27 AM
|
#3
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,841
|
Depending on the tank configuration, you CAN overpressurize it and not have effluent "flowing up the vent stack and onto the roof. The pressure to "push a column of water the 8-10' up to the vent stack opening is significantly more pressure then many black tanks can withstand...
Having an "occasional drip when flushing the toilet tell me that you've got a split black tank, probably somewhere close to the toilet fitting on the top of the black tank.....
You might be able to identify the damage with an inspection mirror or with a borescope (8MM camera to attach to your phone). If it's split, the tank will run around $350-500, labor at a dealership probably well over that, possibly approaching $1000+.
You might consider a "tank patch kit" or a "self help replacement"... Much cheaper that way....
If you elect a dealership repair, consider an insurance claim, after all that's why you have insurance.....
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
05-20-2021, 11:15 AM
|
#4
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
|
Also check the toilet seals. To John's point, the entire system (the tank, tank fittings, toilet seals, etc will be under pressure before pushing water up a 1 1/2" vent stack. The tank and fittings are designed to hold and gravity drain sewage. It's not designed to be a pressure vessel.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
05-20-2021, 11:28 AM
|
#5
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,308
|
Jim, the pressure required to push the 'effluent' up and over the top of the vent pipe is in the neighborhood of 5 to 6 psi. Not much where a garden hose is involved, but a lot on that black tank, and especially on the area around the seals and mounting area for the commode.
On a more pleasant note, be thankful that you didn't decide to flush the commode while this was going on. Instant poo tsunami !
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
07-06-2021, 03:16 AM
|
#6
|
Junior Member
Join Date: Mar 2020
Location: marysville
Posts: 10
|
Black tank leak fixed
Just an update. When I overfilled the black tank, it actually cracked and was leaking where the fitting/dump valve is located. After draining the tank and getting things mostly dry, I used JB Weld on the crack and surrounding area. Been over a month with no leaks. Hoping it stays that way.
|
|
|
07-06-2021, 06:08 AM
|
#7
|
Senior Member
Join Date: May 2018
Location: Folsom
Posts: 363
|
I had a grey tank that cracked where the discharge valve connected to the tank. Used repair kit specifically made for holding tanks. Held for a while and then failed. Ended up replacing the tank.
__________________
2002 Montana 3250RL upgraded a bunch
2005 Ford F-250 6.0 Bullet Proofed - SOLD
2017 Ford F350 6.7 Lariet
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|