You just need to know the brand of the valve. There are 3 and 2 of them are somewhat interchangeable.
Valterra BladeX can be use in the regular Valterra
Valterra, can use either valve/seal
Bristol, you have to use Bristol
If you can drop a few screws to gain line of sight then the Valve will be easy tyo identify. Bristol will have "waves" molded in the face of the valve. I would just get the 72" cable length unless you can take an accurate measurement. More often than not its just the seals that fail, and it might worth trying that first.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|