Slider help needed

[BarbPA]

We have a Sprinter 380BWS and are unable to get the slides to move. The terminals (?) appear to be a bit rusty and corroded so that's probably the problem. Without going through the trouble to replace these now ( our park will be closing for the season in a few weeks) is there an easy way to manually move the slides?

[Flyguy]

If you use the search feature of the forum you can find previous threads that have dealt with this problem, I used the word "SLIDES" and came up with lots of threads and here are just a few:

http://www.keystonerv.org/forums/sho...ghlight=slides

http://www.keystonerv.org/forums/sho...ghlight=slides

http://www.keystonerv.org/forums/sho...ghlight=slides

[Seann]

Originally Posted by BarbPA

We have a Sprinter 380BWS and are unable to get the slides to move. The terminals (?) appear to be a bit rusty and corroded so that's probably the problem. Without going through the trouble to replace these now ( our park will be closing for the season in a few weeks) is there an easy way to manually move the slides?

there is or should be a spot on the motor to put in a speed wrench to close the slide out.. but if you just clean the rust off it may work.