|
01-17-2013, 11:30 AM
|
#1
|
Senior Member
Join Date: May 2012
Location: North of Montreal
Posts: 227
|
Fan, Speakers and Roof
As I am sitting inside listening to the Florida rain, I am considering the acquisition of a Fan-Tastic fan.
Now, if I remove the 4 screws holding the inside part of the actual vent, will-I be able to see if I have electricity close by, without removing the part on the roof.
How can-you remove the speakers from the ceiling?
Out of curiosity, anyone knows the thickness of the plywood used on the roof.
Thanks
__________________
Quiroule:
2018 Ford F150 XLT
Your children and grand-children will not remember what you did for them, they will remember what you did WITH THEM.
|
|
|
01-17-2013, 12:15 PM
|
#2
|
Senior Member
Join Date: Sep 2009
Location: North Carolina
Posts: 1,037
|
Now, if I remove the 4 screws holding the inside part of the actual vent, will-I be able to see if I have electricity close by, without removing the part on the roof?
If there are any wires around you should be able to see them. Hopefully ther eis a light near the vent that is where most wires will be run.
How can-you remove the speakers from the ceiling?
Mine are held up by 4 small screws. but then you will have a wire and and several holes showing.
Out of curiosity, anyone knows the thickness of the plywood used on the roof?
Walk on roff is about all I can tell you, I have walked on mine 4-5 times, I just watch where I step, near the vents, plumbing type things and I am a big guy. I also do not use my camper ladder to get on top of my camper. Seems a little iffy to me?
randy
__________________
Randy "Camp On"
2011 Cougar 327RES
2014 Ford F-350, 6.7L 4X4, CC, SRW
|
|
|
01-17-2013, 12:27 PM
|
#3
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Quote:
Originally Posted by Quiroule
As I am sitting inside listening to the Florida rain, I am considering the acquisition of a Fan-Tastic fan.
Now, if I remove the 4 screws holding the inside part of the actual vent, will-I be able to see if I have electricity close by, without removing the part on the roof.
How can-you remove the speakers from the ceiling?
Out of curiosity, anyone knows the thickness of the plywood used on the roof.
Thanks
|
To remove the inside trim from the vent you may have to also remove the handle. On most models you will be able to see or reach in on at least two sides. If you have an unswitched light close by the power is there.
Most Cougar roofs are 3/8" plywood.
Each model of speaker used will mount differently. Trim will pry off to expose screws.
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|