Hi Barrie: as stated above, yes check adjustment, and also make sure you are receiving 12 volts at the TV at the plug when controler is manualley engadged, then go to TT at wheels and make sure you also have approx 12 volts at that point. After checking the voltage, then check to make sure you have a good ground form the Plug on the TV then from the plug on the TT to ground on the TT and at each magnet since they were removed for surfacing. Hope I explained this well and hope this helps. Happy Campin.............Ron
__________________
Ron
99 Freightliner FL70 Western Hauler CC 300 HP Cat/Chipped/ Allison Auto
12 Montana 3800RE/Level-Up Auto Leveling/Slide Toppers/MorRyde Hitch/VuQube 2000
01 F350 7.3 PSD Crew Cab DRW 4X4 6 Speed/Chipped
|