TV mount on a Bullet 1900RD

[Cdunk]

Has anyone mounted a TV in the new Bullet Crossfire 1900RD yet? Just bought one and looking to buy the correct mounting bracket and best place to mount it. Here is a pic of the TV area in the dinette:


Ideas and your expertise are needed, thanks all!!

[ExplodingLemur]

Our dealer thought a double-articulated mount would work attached anywhere inside the open upper cabinet. It sounded to me like he was just guessing though, so I'm not sure :/

[Jonas]

Originally Posted by Cdunk

Has anyone mounted a TV in the new Bullet Crossfire 1900RD yet? Just bought one and looking to buy the correct mounting bracket and best place to mount it. Here is a pic of the TV area in the dinette:


Ideas and your expertise are needed, thanks all!!

I mounted a small tv mount that I bought at walmart for about $10. I drilled 4 holes to the left of that large opening and just let the mount extend to the right over the open cabinet. The small flatscreen it holds weighs 5 lbs.

[Kristin]

Hi there! I have this same camper with the same television mounting space. Did you ultimately mount a tv on that board next to the open space? Do you mind telling me what tv and mount you used, or maybe sending a picture? Thanks so much, Kristin

[JRTJH]

Originally Posted by Kristin

Hi there! I have this same camper with the same television mounting space. Did you ultimately mount a tv on that board next to the open space? Do you mind telling me what tv and mount you used, or maybe sending a picture? Thanks so much, Kristin

The OP and first poster joined the forum in 2018 and after making only this post, signed off and has not logged into the forum since. That's a "one time visit 5 years ago". Chances of that person seeing your question is minimal.

The two members who responded to the post also joined in 2018. One last logged on in 2018 and the other last logged on in 2020.

You would likely get much better responses if you'd start your own thread (rather than post in a "dead thread"). That way, you can explain what you're trying to do and direct those questions to the "active forum members" not rely on answers from members who have not been here in years.

[ExplodingLemur]

Originally Posted by JRTJH

The two members who responded to the post also joined in 2018. One last logged on in 2018 and the other last logged on in 2020.

I have logged in solely to prove you wrong


However, I never mounted anything to that spot.

[JRTJH]

Originally Posted by ExplodingLemur

I have logged in solely to prove you wrong


However, I never mounted anything to that spot.

Statistics don't lie, but happy to see you "logged in solely to prove...." Welcome back.