|
Fresh tank, city water issie
So we are using our new to us Fusion 325 for the first time this weekend.
I hooked the hose to the city water inlet and turned it on, not realizing the valve was in the tank fill position. Well we over filled the fresh tank.
So we drained some water from the tank and turned the valve to the city water position. Later I notice water coming from the power fill port again but not as fast as it did when it filled before.
Anyone had this happen before, seems like my fresh tank is being filled in either position that the valve is in?
Guessing the valve will need to be changed?
|
Threaded Mode
