Hi,
First time poster; hey everyone!
Last season my Suburban water heater worked fine.
In case this may be related: At the end of the season the 12V switch to retract my slides would not work. Checked fuses which were fine and used a drill on the pump to manually retract them. Used same method to extend this season.
When I opened up the trailer this season the hot water heater 'SW16DEL' (electric side) would not work, nor would the propane side (no light beside switch when I turn switch on/no ignition sounds). I checked the breaker and 12V fuses in the electrical panel. all appear fine.
The troubleshooting I have done so far includes: replaced the anode, heater element, on/off switch on bottom left corner of the front of the water heater and the 110 thermostat (both switches on plate).
Wondering if it may be a 12V issue that is affecting both systems? If so, I am at a loss of where to look/what to do next.
I am not an electrician but do own an ohm meter. Any suggestions for the next step would be appreciated. We're kind of missing our hot showers.
Thanks!
Kevin