iN*Command

[Eric27]

Does the iN·Command system start the hot water heater when put on gas or is there another switch to do that?
I have a 2019 Cougar 24sab

[Mikesr]

In Command can place the HWH on either electric or gas mode or both at the same time. If you’re having trouble with the gas mode check if the propane tanks are full and turned on or you may have to purge the gas line by operating the stove or furnace to ensure no air is in the line.

[Eric27]

Thanks. Is there a light or something to indicate if it is not lighting?