The mods have started!
Added an accumulator and some soft tubing to improve pump performance cut down on pump noise. Preciously I could hear the PEX radiating the pump noise the full length of the camper. Now I only hear the pump itself. Unfortunately it's right next to my wife's side of the bed. I also added the Flo-Jet strainer.
Hook up of the accumulator was pretty straight forward and convenient thanks to how Keystone plumbed things. I disconnected the city water line from the PEX and attached it to the accumulator (lower left) and then ran a flexible sink riser from the accumulator to the PEX where the city line connected. I disconnected the PEX from the pump output and connected a flexible sink riser from the pump through a male - male nipple to the PEX. The one line touching the wall has been tied back to the others. The strainer is just above the accumulator.
I do have to say while it is a little cramped in that compartment it is probably the easiest pump location I've dealt with.
Outside I quickly got tired of the fresh water drain cap. Added a threaded PVC ball valve.
The beehive is Keystone's generous quantity of expanding foam.
Sent from my LG-H810 using Tapatalk