Fuel nozzle filter

[huhhhhh]

Added a fuel nozzle filter to the pump station. Anyone know what the trimmed out hole on the back wall of the pump compartment is for.

https://www.amazon.com/4003-Napa-Gol...e%29+Filter%2C

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[chuckster57]

Where is the fill port?

[huhhhhh]

Not sure what you mean by fill port

[Racebug]

the hole in the back is where your supposed to put the end of the nozzle when you are done with it and close up the door.

[huhhhhh]

I thought that's what they were going for. It wouldn't fit right because the pump is mounted right in the center of the compartment. The hose end of the nozzle would stick out too far and not let the door close properly. I think if they mounted the pump further to the right side of the compartment then the nozzle would fit and store better in that hole.

[Racebug]

The hole is in the right side or rear facing side and works pretty well. the pump is mounted too close to the same side and the hose is kinked from being too close.