|
01-27-2021, 01:01 PM
|
#1
|
Senior Member
Join Date: Oct 2020
Location: Newport
Posts: 215
|
Capital swap to 22" Blackstone complete!
I swapped my worthless Capital grill out to a 22" BlackStone Griddle yesterday. This was a super easy swap for my floorplan. Basically just had to transfer the rails and cut a notch for the gas connector.
I took it a step further and 3D printed a trim piece to cover the raw wood around the notch to give it a factory finished look.
If you are on the fence about this swap, I highly recommend it!
__________________
2021 Keystone Cougar Half-Ton 32BHS 5th Wheel
2022 F-450SD, Lariat Ultimate, CC, 4WD, FX4, Rapid Red, Curt A16/R24 Slider
Upgraded: 2020 F-250SD, XLT Pre, CC, SWB, 4WD, FX4, HCTP, 6.7 PSD, 3.55 e-lock, Blue Jeans Metallic
|
|
|
01-27-2021, 03:24 PM
|
#2
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,757
|
Nice job! Get ready for the requests on that printed part.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
02-05-2021, 04:32 PM
|
#3
|
Senior Member
Join Date: Apr 2020
Location: Canton
Posts: 289
|
SAAAWEEEEET. That thing is a perfect fit.
Yes, any/all info to do mine in same model would be most appreciative. Camping Life also did this I believe with a 17. That 22 looks good.
__________________
Eddy
2019 GMC Sierra 2500HD 6.0L
2020 Cougar 32BHS
|
|
|
02-05-2021, 06:22 PM
|
#4
|
Senior Member
Join Date: Sep 2020
Location: Jacksonville
Posts: 993
|
I also switch mine out for a 17 inch BS. Works great
__________________
Bob/Kay
Jacksonville, Nc
2020 Keystone Cougar 5th wheel 29 rks traded now
2021 3761 fl Montana 5th wheel
Pulled with a 2022 F350 King Ranch
Retired LEO after 35 years just enjoying life now.
|
|
|
04-16-2021, 03:41 PM
|
#5
|
Junior Member
Join Date: Oct 2020
Location: Strathroy
Posts: 9
|
Do you have the file to make that part?
__________________
[/SIGPIC][/SIGPIC]
2020 Ram Limited
2020 Premier 26RBPR
|
|
|
04-16-2021, 07:10 PM
|
#6
|
Member
Join Date: Apr 2021
Location: Mansfield
Posts: 71
|
Damn, that looks awesome. Well done, Brantel!
|
|
|
04-22-2021, 05:18 PM
|
#7
|
Junior Member
Join Date: Oct 2020
Location: Strathroy
Posts: 9
|
Can I buy a printed part from you?
__________________
[/SIGPIC][/SIGPIC]
2020 Ram Limited
2020 Premier 26RBPR
|
|
|
04-24-2021, 07:52 AM
|
#8
|
Senior Member
Join Date: Oct 2020
Location: Newport
Posts: 215
|
Quote:
Originally Posted by Finjergusson
Can I buy a printed part from you?
|
I don't want to get into manufacturing these but check out the next post.
__________________
2021 Keystone Cougar Half-Ton 32BHS 5th Wheel
2022 F-450SD, Lariat Ultimate, CC, 4WD, FX4, Rapid Red, Curt A16/R24 Slider
Upgraded: 2020 F-250SD, XLT Pre, CC, SWB, 4WD, FX4, HCTP, 6.7 PSD, 3.55 e-lock, Blue Jeans Metallic
|
|
|
04-24-2021, 07:52 AM
|
#9
|
Senior Member
Join Date: Oct 2020
Location: Newport
Posts: 215
|
Several have asked for the file to print this 22" Blackstone gas fitting notch cover I designed and printed. Here you go:
https://drive.google.com/file/d/1uRh...ew?usp=sharing
__________________
2021 Keystone Cougar Half-Ton 32BHS 5th Wheel
2022 F-450SD, Lariat Ultimate, CC, 4WD, FX4, Rapid Red, Curt A16/R24 Slider
Upgraded: 2020 F-250SD, XLT Pre, CC, SWB, 4WD, FX4, HCTP, 6.7 PSD, 3.55 e-lock, Blue Jeans Metallic
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|