Quote:
Originally Posted by SteveC7010
Food for thought and no criticism intended:
I think it could be a lot easier and use a lot less adapters and such if one just removed a 90 degree ell from the 1/2" iron pipe a little further downstream and replaced it with a tee to which the new shut off and QC are then connected.
If I recall correctly, a while back someone posted a similar mod using the method I just described.
|
All depends where the regulator is in the system. Some trailers have a unregulated High pressure line that would work on but many the regulators are right behind the tanks and doing it that way would require removing the regulators of the appliances (Grills/Stoves/etc.). Some people have claimed success double regulating the propane but the large majority say they have too low a flame and some claim their grills are blown out with the least amount of wind.