When you back , or pull forward into a site with a tight radius situation, even not on an incline, you add sidewall stress to one or both tires/axles. It's even worse if you have a triple axle.
After you get the camper where you want it, it's vital to pull straight forward, then straight back to your un-hook position. This will take the side stress off of your side walls.
If you look up the floor plan for your model, it should give you all of the spec's.
Good Luck,
__________________
Pull Toy
Steve & Jan, Ava & Emma (Mini Schnauzers):
2016 F350 Lariat 4X4 Powerstroke CC/SB "PULLTOY V"
2013 Alpine 3535RE "MAGIC CARPET IV"
Proud Navy Vet!
|