Transfer Switch and Hard Start Capacitor
I have a Honda EU3000i generator I purchased in 2002. I used it to run a 13.5k AC in a Forest River Wildcat with direct cable hookup. Then in a 2012 Copper Canyon with a 15k AC and a Progressive Dynamics 30 amp transfer switch.
Both worked with no problems.
Now I have a 2014 Cougar 325SRX. I installed a Progressive Dynamics PD52 50 amp transfer switch. For one thing I don't like the hum it makes even when using shore power. The relays must be energized in both states.
Also the relay kicks out when running my generator in economy mode and an AC compressor kicks in. I think it has a sensor that kicks out if the generator voltage drops below 90volts.
This is frustrating. I have been running ACs with this generator since 2002.
Does anyone know if a hard start capacitor for the ACs will solve this problem? The are cheap and are probably a good upgrade to the ACs anyway.
Also I would love to replace the ATS with a manual transfer switch. I know that will never fail and it won't hum. I have searched and can only find 2 pole double throw switches. With 50 amp service we need 3 pole switches.
Thanks,
Bobby
|