Misaligned Slideout
I have a 2002 Keystone Hornet 29G.
When the slider starts out the rear starts out first, then the front will start to move,when its out all the way, the rear is snug with the wall, but the front lacks about 2" being snug. Bring it in and the outside both back and front, are snug with the outside wall. I have tried adjusting the drive shaft that runs from back to front but this only left the front sticking out 2" when it would be closed. Not good if you are towing in the rain..
Any help with this would be greately app.
Sam
2002 Keystone 29G
1999 f350 7.3
|