|
|
10-21-2018, 05:28 AM
|
#1
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
Which "T" valve stems can I install in my TT wheels?
I am purchasing a 2019 Cougar Half-Ton 26RBSWE and would like to install an after-market TPMS. I would like to be able to add air to the tires without having to remove the TPMS sensors and the popular way to do this on my motorcycle is by installing "T" valve stems:
https://www.ebay.com/i/113030412348?chn=ps
I know some of the TPMS sensors are "pass through" (or something like that) but these require the use of metal valve stems and I think my trailer comes with rubber, so I would have to change the valve stems out anyway.
Are there "T" valve stems which will work with my trailer wheels?
Thanks,
|
|
|
10-21-2018, 09:17 AM
|
#2
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
Metal over rubber, for the 6 bucks or so a valve go with metal. No rot, no ripping the rubber base out over bumps or high pressure just no worries. You are able to go with more choices of TPMS.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
10-26-2018, 04:04 AM
|
#3
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
Any idea what I can use for "T" valve stems on my trailer wheels?
|
|
|
10-26-2018, 06:00 AM
|
#4
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by MarkEHansen
Any idea what I can use for "T" valve stems on my trailer wheels?
|
I don't know of any "T" valves approved for automotive use or for travel trailer use. While there may be some, why would you want "two avenues to lose pressure" ????
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
10-26-2018, 06:03 AM
|
#5
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
I would like to use "cap" style TPMS sensors with locks and don't want to have to remove them while checking the air pressure manually.
This is quite common on motorcycles - I'm surprised they aren't used on TTs.
|
|
|
10-26-2018, 07:30 AM
|
#6
|
Senior Member
Join Date: May 2018
Location: Mechanicsville
Posts: 478
|
I haven't seen these before. My Gold Wing just had the angled stems. As far as approval, it's the same for motorcycles as any other vehicle. With that said, I might be a little worried about so much stem hanging out from the wheel with sensors attached.
On the Wing it's on the inside of the wheel. It would be hanging out on a trailer wheel.
A lot more exposed.
|
|
|
10-26-2018, 07:30 AM
|
#7
|
Senior Member
Join Date: Oct 2016
Location: Sherman
Posts: 326
|
Here is a link to the ones I use. I have been very happy with them.
https://www.raneystruckparts.com/tal...ent=Big%20Rigs
__________________
2017 Alpine 3401RS,Titan Disc brakes,Morryde SRE 4000, 2016 Ram 3500HD Laramie SRW,LWB,4X4, Aisin transmission
|
|
|
10-26-2018, 07:33 AM
|
#8
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
Thanks, Ddubya, but those are adapters which screw on to the existing valve stem - which must be metal. I was looking for "T" valve stems which mount in the rim itself.
However, it's looking like I may have to install metal valve stems and then go with your suggestion.
|
|
|
10-26-2018, 09:50 AM
|
#9
|
Senior Member
Join Date: Jul 2013
Location: Box Elder
Posts: 2,909
|
If you do install metal stems, I would suggest using the stems that install from the inside of the wheel and have the nut on the outside. I’ve had several instances where stems with the nuts inside have come loose and the latest one I had to put the spare on in a very difficult location along the road. Just make sure the stem is long enough to have room to screw on the sensor. I use the TST flow through sensors and change the batteries annually. They have been very reliable and easy to add air when needed.
|
|
|
10-27-2018, 04:56 AM
|
#10
|
Senior Member
Join Date: May 2018
Location: Mechanicsville
Posts: 478
|
|
|
|
10-27-2018, 05:07 AM
|
#11
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,751
|
Quote:
Originally Posted by MarkEHansen
I am purchasing a 2019 Cougar Half-Ton 26RBSWE and would like to install an after-market TPMS. I would like to be able to add air to the tires without having to remove the TPMS sensors and the popular way to do this on my motorcycle is by installing "T" valve stems:
https://www.ebay.com/i/113030412348?chn=ps
I know some of the TPMS sensors are "pass through" (or something like that) but these require the use of metal valve stems and I think my trailer comes with rubber, so I would have to change the valve stems out anyway.
Are there "T" valve stems which will work with my trailer wheels?
Thanks,
|
I get your experience with bikes and I would think that style would be popular with the interference of the spokes. If you haven't purchased the tpms yet then I'd suggest straight bolt in metal stems and flow thru tpms sensors. Most tpms manufacturers have set screw "locks" for the sensors. JMHO, YMMV
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
10-27-2018, 04:46 PM
|
#12
|
Senior Member
Join Date: Feb 2016
Location: SE Michigan
Posts: 1,659
|
I did my research on appropriate valve stems when using TPMS on each wheel. Several RV folks suggested these Ford F series stems. They are completely metal and seat perfectly on most wheels from Sendel and Hi-spec. I've used them on two different sets of wheels for my Bullet TT. Work great with my sensors.
__________________
2017 Keystone Bullet 308BHS in Saddle.
2017 RAM 2500 Laramie Mega Cab 4x4 Hemi 6.4L
2008 GMC Yukon XL Denali (SOLD)
Hensley SwiftArrow Control Hitch with 1000 lb Spring Bars
Me, DW, (3) little DS's, and 1 rambunctious Boston Terrier
|
|
|
10-27-2018, 05:06 PM
|
#13
|
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 779
|
Quote:
Originally Posted by MarkEHansen
I would like to use "cap" style TPMS sensors with locks and don't want to have to remove them while checking the air pressure manually.
|
Maybe I’m taking what you wrote too literally, but with the TST TPMS we have you don’t have to remove them to check the pressure. Turn on the display in the truck, and it displays the pressure in each tire.
I have to admit though, I have the flow-thru sensors, and am about ready to get rid of them and get a set of non-flow-thru ones. I have the hardest time holding everything in alignment to add air to the tire with the sensor on, without having air leak out around it.
__________________
--Lynette
2019 F-350 diesel 4x4 CC LB DRW, not the mom taxi anymore...
2021 Alliance Paradigm 340RL
2016 F-350 diesel 4x4 CC LB SRW, mom taxi - sold
2014 Cougar XLite 28RDB - sold
|
|
|
10-27-2018, 05:31 PM
|
#14
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
The TPMS system is a good quick check and to use down the road, but it doesn't replace actually checking the tire pressure (before the trip and when adding pressure) using a good quality pressure gauge. At least that's my take on it.
|
|
|
10-27-2018, 05:39 PM
|
#15
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,751
|
Quote:
Originally Posted by MarkEHansen
The TPMS system is a good quick check and to use down the road, but it doesn't replace actually checking the tire pressure (before the trip and when adding pressure) using a good quality pressure gauge. At least that's my take on it.
|
Mine are within a 1/2 lb of every mechanical gauge I've used so I do trust the readings seeing how I'm not entering any NASCAR races with it.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
10-27-2018, 06:09 PM
|
#16
|
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 779
|
Quote:
Originally Posted by flybouy
Mine are within a 1/2 lb of every mechanical gauge I've used so I do trust the readings seeing how I'm not entering any NASCAR races with it.
|
That’s been my experience also, so I’m willing to believe what it tells me.
__________________
--Lynette
2019 F-350 diesel 4x4 CC LB DRW, not the mom taxi anymore...
2021 Alliance Paradigm 340RL
2016 F-350 diesel 4x4 CC LB SRW, mom taxi - sold
2014 Cougar XLite 28RDB - sold
|
|
|
10-28-2018, 02:40 PM
|
#17
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
I asked the same question as post #13. With the TPMS, no need to remove caps or put a gauge on any wheel. Turn on the unit and see what it reads. I find a tire or two may need a few pounds. I am getting ready for a 15 day trip elk hunting and have not used the TT in months. 3 tires need air, down 5 and 8 pounds from max. When I got mine I tested the unit reading with 2 gauges and found psi the same in the 2 readings and unit so I trust it.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
10-28-2018, 06:37 PM
|
#18
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,751
|
Mine are not the flow thru type but I don't consider it any more inconvenience when adding air. For me, removing the sensor is easier than removing a valve stem cap as I can get a better grip on the larger sensor. YMMV.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
11-03-2018, 04:52 PM
|
#19
|
Junior Member
Join Date: Feb 2018
Location: Mission Viejo
Posts: 8
|
"T"valve stem
e-Trailer sells some.
|
|
|
11-03-2018, 04:58 PM
|
#20
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
I've been all over etrailer.com and can't find these. If you have a link, I would sure appreciate it.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|