Post your 303TG (or similar) mods...

DTJ9610 · 05-04-2011, 06:55 AM

I've had the 303TG since February and have only been able to install a few basic necessities (hooks, splash guards in tub and storage for the fishing poles). As for my last trailer a 17ft hybrid I only owned it for 7mo and never really had a chance to do anything to it. So I am looking to see if anyone has done any trailer specific mods to their Laredo 303TG (or similar style). Pics would be wonderful.

Yes I have looked at a number of the mods and have some ideas, however as mentioned above being more trailer specific may help.

Thanks

5forcamping · 05-04-2011, 01:27 PM

i have a 4' piece of 6"pvc pipe that i plan on using for sewer hose storage as soon as i figure the best way to mount it underneath trailer on slide out side on the very front. fits perfectly side by side with frame. already have an end cap & painted pipe & cap black as well as drilled holes down side of pipe. just need to find some kind of brackets to screw/bolt to frame and screw on to pipe.

Myyke · 05-14-2013, 07:18 PM

If you look up my posts, you'll see some of the mods i have done to my 2013 laredo 303tg, with more to come.

cm7571 · 05-18-2013, 07:28 PM

I have a 26 ft sunnybrook n was storing fishing poles in shower but I now they are hanging from the ceiling. I bought thin wire n ran it across on both sides of bedroom with hooks then put tip of pole on one wire and lay the handle on the other wire.

bmallak · 05-21-2013, 01:36 PM

If anyone has pics of how they mounted a tube for the sewer hose I would love to see it. I have 2013 303tg and I am still trying to figure out how to mount it. I was looking at these http://www.dwincorp.com/products/82/SUPER-TUBE and they recommend a 60" tube which would require some spacers in order to clear bracing on the frame.

LiteFoot · 05-22-2013, 10:00 AM

Quote:

Originally Posted by bmallak

If anyone has pics of how they mounted a tube for the sewer hose I would love to see it. I have 2013 303tg and I am still trying to figure out how to mount it. I was looking at these http://www.dwincorp.com/products/82/SUPER-TUBE and they recommend a 60" tube which would require some spacers in order to clear bracing on the frame.

Bmallak-

Couple options on the Sani-tube. You can mount it on top of your rear bumper using some threaded rod, nuts/washers, and some DIY brackets or U-bolts. Or you could use some angle iron from Lowes and mount it underneath your trailer using existing screws(potentially - models vary). I have used both & they are easy mods to do, plus pretty convenient.

Ryan

bmallak · 05-22-2013, 12:48 PM

The bumper will not work because of the spare tire and grill mount that is already mounted there. That and I want a cleaner look than having the tube there. I want to mount it underneith but there are floor supports every 48" so I need to space it down to clear those and make it easier to access. I have a couple ideas I need to try when I get time. I was just hoping someone with the same model had pics of there setup. Thanks

bmallak · 05-22-2013, 01:11 PM

I wasn't happy with the bunk ladder that came with the 303tg. So I added sides to the bunks and built ladders to match. So far my kids 6 & 3 love it and have not had to worry about anyone falling out at night. And the fold up bunk still goes all the way up. The first 2 pics are before and rest are after. the colors actually look really good in person than in pics. So far everyone that has seen it thought it came like that so I must have done something right.

bmallak · 05-22-2013, 01:12 PM

Pics of the other side after.

DTJ9610 · 07-16-2013, 07:10 AM

Looks great. We actually use the solid bunk for the boys cloths bins. Don't think anyone has slept up there yet. I like that for the fold up bunk though.

You may also like: