Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Lite Weight Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 12-03-2014, 04:31 PM   #1
onsite
Junior Member
 
Join Date: Dec 2011
Location: Florida
Posts: 17
2510 rb model cable slide

I have a 2012 2510 RB with a slide. One of my cables is loose a few inches when the slide is opened. All cables seem to be in the roller wheels. . I read the accuslide adjustment guide, but can not reach the nuts on the cables to adjust. There is a header with only about 2" of space that runs accross the top of the inside of slide where the motor is. Doesnt matter if slide is in or out. Impossible to reach the nut assemblies. The header is stappled in, I removed the Passport center piece but no luck reaching. how does Keystone expect someone to make adjustments with out taking the header off?
Does anyone know? I guess I'll have to take it to a dealer because if the header needs to come out , it will have to be re veneered do to the staples being removed.
Any help would be great.
Thanks
onsite is offline   Reply With Quote
Old 12-03-2014, 06:41 PM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,237
I have had success moving the slide in about a foot, and then standing on a foot stool. Granted it isn't the most comfortable, but it allows me to make the adjustments without taking anything off.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 12-04-2014, 01:46 AM   #3
Clark
Member
 
Join Date: Oct 2011
Location: Mesa,Az
Posts: 54
Hi, I have the exact year and model, It is tough to get to the nuts on the cable ends, Like chuckster57 said I brought the slide in a foot or so and was able to reach over the header to adjust the cables, Tight yes, To take the header off would be even a bigger pain, Keystone should have made the header in a way where you could pop that header on and off to adjust as necessary.
Clark is offline   Reply With Quote
Old 12-07-2014, 05:01 PM   #4
onsite
Junior Member
 
Join Date: Dec 2011
Location: Florida
Posts: 17
Cable adjust

OK thanks for the info will try again next weekend, seems like only about an inch or so over the header. Did you adjust all? Accuslide Instruction shows1/2 play up and down on each cable.
Thanks again
onsite is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 05:54 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.