In Command + Lippert Stabilizer Jacks

[rlh1957]

The two systems are separate and not integrated.
In Command has the ability to control levelers but on a different brand system integrated into In Command.
It is a manufacturer option they have when building a coach. I doubt if they ever used on Cougars.

The Lippert system has to have something different on it to do wireless from your phone. I’m unsure if it is a user option to buy from Lippert or not.

[Gord]

You could build your own wired remote with a 4 function crane push button station https://www.amazon.ca/Buttons-Pendan.../dp/B07HG5FQ6G and whatever length of 6 conductor 16awg cabtire (extension cord) you wish a male and female Molex.com plug and receptacle. I'm thinking that there is one power supply wire to both switches and then 4 wires needed for functions. You could break into each of the wires to a bulkhead style Molex receptacle and put the Molex male plug to pigtail cordset. This way you would have both ways to control your stabilizers. https://www.molex.com/molex/products...hange_products

[chuckster57]

Originally Posted by rlh1957

The Lippert system has to have something different on it to do wireless from your phone. I’m unsure if it is a user option to buy from Lippert or not.

Lippert uses “One command” and depending on system has the ability to be controlled via app.

[jacksonbgood47]

You can put after market Lippert auto leveling system 3.0 on your trailer and it comes with a remote. A little pricey contact Camping World for price and installation.

[chuckster57]

Originally Posted by jacksonbgood47

You can put after market Lippert auto leveling system 3.0 on your trailer and it comes with a remote. A little pricey contact Camping World for price and installation.

I believe OP’s trailer is a travel trailer. Ground control 3.0 is for fifth wheels. His trailer would use ground control for TT.

https://store.lci1.com/ground-control-tt-kit-672136

[BSam]

Originally Posted by Readi2Roll

I have a 2019 Cougar 26RBS. I would like to use the In Command system (via phone app) to lower and raise my Lippert stabilizer jacks. In Command says no way. Has anyone figured out a way to use a "gateway" or another device to do this? Seems silly to have to crawl into a compartment to raise and lower the stabilizers when there is this cool system that should be able to do it.

This isn’t about the stabilizers but I’m curious if your In Command still works at all. I can’t connect mine and it seems ASA is no more in the App Store.

[markcee]

Their app is still out there as is the website: https://in-command.net/

Their CS phone support is also very helpful:

(800) 688-3135 – Option 1

[Readi2Roll]

Originally Posted by BSam

This isn’t about the stabilizers but I’m curious if your In Command still works at all. I can’t connect mine and it seems ASA is no more in the App Store.

I totally agree with markcee: in-commands tech support is among the best.
A couple of my lessons learned: 1) if you update your APP, you should update the RV's In-command firmware otherwise they may not sync. 2) when you update the firmware, use ONLY the size thumbdrive they recommend; any larger - will not work. Also, as mentioned in other posts, neither slide or awning will work with dead or missing battery, even if on shore power. best of luck!

[BSam]

Originally Posted by Readi2Roll

I totally agree with markcee: in-commands tech support is among the best.
A couple of my lessons learned: 1) if you update your APP, you should update the RV's In-command firmware otherwise they may not sync. 2) when you update the firmware, use ONLY the size thumbdrive they recommend; any larger - will not work. Also, as mentioned in other posts, neither slide or awning will work with dead or missing battery, even if on shore power. best of luck!

Thanks so much! How do I update the firmware?
ETA: I’ve got it. Thank you so very much!

[BSam]

Originally Posted by markcee

Their app is still out there as is the website: https://in-command.net/

Their CS phone support is also very helpful:

(800) 688-3135 – Option 1

Thank you!