Sure it's possible. Plywood will work, but it will also break down with time. I no longer have the Andersen but when I did I welded up a base using light steel to lift mine about 1". I have the taller B&W ball to make sure it would work with the hitch being a little higher up. As long as the torques are set correctly it will work. I had no problem at all with mine.
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana High Country 305RL
2015 RAM 3500 Crew Cab 4x4 DRW
Demco Recon Hitch on RAM Puck Ball
|