2016 Keystone Couger window replacement

[Honfor500]

I have a 2016 Keystone Couger 25 RLSWE travel trailer and I broke the rear passenger side window.
Wondering where to find a replacement and how to install it.

[bobbecky]

https://www.trekwood.com/parts-searc...arch-keywords=

[chuckster57]

To install:

Remove valence, window treatments. Roberts head #2 bit to remove all the screws in the flange. Save the screws for the new window.

Once the inside flange is removed, you can remove the window from outside. I have found it easier to use a sharp razor blade and carefully cut the sealant before pulling on the frame.

Clean the surface of the wall to remove any sealant. Apply a new seal to the new window frame making sure the gap is at the bottom. Have someone hold the window in place and put 4 screws in the inside flange in the centers. Then install all the screws until they are tight and the window is flush. Apply new RV rated sealant across the top and radius. Re install window treatments.

[Hblick48]

Thieves broke 2 windows on our rig. Called a glass company. They came out and measured. About a week later, the glass came in and was installed. It was under $400 for both.

[Honfor500]

Originally Posted by Honfor500

I have a 2016 Keystone Couger 25 RLSWE travel trailer and I broke the rear passenger side window.
Wondering where to find a replacement and how to install it.

I'm having trouble finding the right window it is the passenger side lower vent window on the back end of the trailer and its frameless

[Pull Toy]

If it’s Kinro window the model number will be visible once you remove the frame. Google “Kinro windows”.

Good luck,

[bobbecky]

And Kinro is owned by Lippert. https://www.lci1.com/rv-windows