Quote:
Originally Posted by asherdav
my tv is connected just as your pic shows and ota works fine for all TV's but in order to watch Park cable must move the connection to one of the loop connection. only bdr tv gets park cable
|
Are you "pressing the power button to turn the OTA amplifier to off" ????
On the antenna amplifier wall plate, there is a small (almost invisible) button to push. There is a red or green LED that lights when the amplifier is ON. If that LED is on, the amplifier is on and all signals from a cable/satellite dish will be shunted to ground. If you want to watch cable/satellite, push that little button, connect the cable/satellite input, go to the TV menu and select CABLE, then run a channel scan.
In short, if the antenna amplifier is on, the only way you can get the signal to any TV is to bypass the amplifier by connecting a single TV, similar to what you're describing.