I was not able to find much on any search over the past week. If this is redundant let me know and Ill delete.
I want to start a thread on the installation of the 3rd ac on my prepped 2021 Raptor 423 with the in command system. Part number searches were often sketchy and A phone call was almost always needed to verify I was getting the correct part. Some of the parts are on backorder, more on that when I get to those parts.
First off I have 2 of the coleman mach 10 13.5 btu units ( black cover) currently installed so to order the 3rd unit I searched and found the best price at Camping world. M#45203-6792 Mach 10 13.5 NDQ AC. Total with tax was $811.68. No issues with this order.
The next part is the inside cover, vents,filters and mounting hardware. Airxcel M#8430A6321. I found this part available from many sellers for $60-$80 bucks.
Now, these next 2 items are the hold ups. Looking at a 2 month wait is the best I found. The excuse, Covid, of course. The control pack is Airxcel M#9430-752, this mounts up behind the filters in the return air area. The larg white connector from the mach 10 plugs into this and the power from the coach is supplied and connected here. This part I ordered through TX RV parts in San Antonio, coleman will not sell you this or the next part. It was about $200
Next is the gateway Airxcel M# 9430-5501, about $160 on backorder. this appears to have the plug receiver for the white 2 wire plug prepped in the coach, Ill have pics once the install happens. The other wires needed will be connected from this gateway, the prepped coach will have the 110v power coming from the #3 ac breaker, the 2 brown wires that are the room temp sensor connectors and the yellow wire that houses the 2 small wires with the white plug at the end of it. I'm going to attach pics so that you will see what I am working with.