Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Tires, Tires, Tires!
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 07-31-2016, 08:08 AM   #1
John & Co
Junior Member
 
Join Date: Jul 2016
Location: Central Florida
Posts: 6
torque wrench for lug nuts

I apologize in advance if this subject has been covered, but I couldn't readily find a thread that dealt with it.

I've never used a torque wrench before.

Is a torque wrench really necessary to tighten the lug nuts? I know the company says they should be used, but I didn't know if that was just a product liability concern.

I've never had a wheel fall off in my 50 years of changing my own tires, but maybe I've just been lucky, I don't know. I've also never owned any camper with more than one axle.

Your thoughts are appreciated!

Thanks!
__________________
In Central Florida
Current Camper: 2017 Hideout 232LHS
TV: 2WD 2012 King Ranch F-150 Ecoboost
ΣΧ UCF '78
John & Co is offline   Reply With Quote
Old 07-31-2016, 08:18 AM   #2
bsmith0404
Senior Member
 
bsmith0404's Avatar
 
Join Date: Mar 2014
Location: Las Cruces
Posts: 4,665
Yes they are required. Over torqueing is just as dangerous as under torqueing. The studs will stretch to a certain point and then go back to their original shape which creates the holding power to keep the wheel in place. When you over torque, you go beyond the yield point and will not spring back.

This link is to an article that does a good job of explaining this.
http://www.crashforensics.com/wheelandhubfailures.cfm
__________________

Brent
2013 Alpine 3500RE
2019 Silverado 2500HD Duramax
U.S. Air Force Retired (25 yrs)
bsmith0404 is offline   Reply With Quote
Old 07-31-2016, 08:29 AM   #3
Desert185
Senior Member
 
Desert185's Avatar
 
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
Definitely, yes. Torquing your cars lugnuts is important, too, to avoid warping the brake rotors. Good shops use torque wrenches, and I always follow up after some miles. The only warped rotors I've experienced were on used cars I've worked on. Never on my cars.

I rotate my own tires, BTW. Making an appointment, driving into town, waiting, etc. makes doing it myself, with a torque wrench, so much more convenient. I also give a look for other issues while I'm under the vehicle and time the oil change, lube, rotate, brake pad check, etc. at the same time.

Buy a 1/2" drive torque wrench rated for 200#. I'm not going to get into brands. Other's will post their preferences here.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
Desert185 is offline   Reply With Quote
Old 07-31-2016, 11:33 AM   #4
Dave W
Senior Member
 
Join Date: May 2015
Location: Near Saratoga Springs,
Posts: 1,131
Absolutely you should use a torque wrench. Tightening lug nuts down until they squeak just doesn't do the job. A 150 lb ft is all you really need for a trailer and unless you have a late Ford Super Duty (and probably Ram nad GMCs as well) which require 165 lb ft, and want to do them as well.

For an occasional user, a beam torque wrench is 'close enough' for lug nuts. Leave the dial and clicker types to the pro level mechanics as they will need recalibration occasionally.
Dave W is offline   Reply With Quote
Old 07-31-2016, 11:37 AM   #5
Tbos
Senior Member
 
Join Date: Jul 2014
Location: Solomons
Posts: 3,874
John & Co,
If you have steel painted wheels it is definitely a must. They paint the wheels and then don't burnish the mating surface where the lug nuts meet the wheels. When I started using the torque wrench I was surprised how much the I could tighten then them after each trip until the mating surfaces were seated better. It only takes a couple minutes to check all 4 wheels. I bought my torque wrench at Walmart for less than $30. It's worth the investment and time. FYI they make aluminum wheels that have a tag that says "Never Torque ". They still need to be torqued when installed.
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
Tbos is offline   Reply With Quote
Old 07-31-2016, 11:43 AM   #6
CWtheMan
Senior Member
 
CWtheMan's Avatar
 
Join Date: Feb 2010
Location: Taylors, SC
Posts: 3,031
Wheel nut torque starts on the bottom of page 22.

http://www.keystonerv.com/media/3003...17_revised.pdf
CWtheMan is offline   Reply With Quote
Old 07-31-2016, 04:57 PM   #7
gearhead
Senior Member
 
Join Date: Jul 2013
Location: Liberty, Texas
Posts: 5,021
Go ahead and get you a 1/2" drive torque wrench. If you have a Harbor Freight nearby, they put them on sale occasionally for $20. You need one that will read from 80-130 foot pounds. Newton meters is metric. Do a little research on the do's and don'ts of torque wrenches.
I've got: 1/4", 3/8", 1/2", and 3/4".
The main thing is to return the click type to zero after use and for storage so the spring can relax.
Torque values are usually expressed with dry threads. Don't go swabbing grease on the threads.
And no...2 clicks at 60 ft lbs does not equal 120 ft lbs! I worked with a boy that earned the nickname "2 clicks Merle" for 30 years for that comment.
__________________
2018 Ram 3500 Laramie CC DRW LWB 4X4 Cummins Aisin 3.73
Reese Goosebox 20K
2018 Heartland Landmark 365 Oshkosh
2008 Bigfoot 25C9.4 LB Cabover
gearhead is offline   Reply With Quote
Old 07-31-2016, 06:55 PM   #8
Desert185
Senior Member
 
Desert185's Avatar
 
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
Quote:
Originally Posted by gearhead View Post
Go ahead and get you a 1/2" drive torque wrench. If you have a Harbor Freight nearby, they put them on sale occasionally for $20. You need one that will read from 80-130 foot pounds. Newton meters is metric. Do a little research on the do's and don'ts of torque wrenches.
I've got: 1/4", 3/8", 1/2", and 3/4".
The main thing is to return the click type to zero after use and for storage so the spring can relax.
Torque values are usually expressed with dry threads. Don't go swabbing grease on the threads.
And no...2 clicks at 60 ft lbs does not equal 120 ft lbs! I worked with a boy that earned the nickname "2 clicks Merle" for 30 years for that comment.
My Ram is 135# and some trucks are higher. A 200# will cover it all. Plus, they are most accurate in the middle of the torque range. Get one with a lifetime warranty.

I think a clicker is the way to go. Easy use and no batteries to die when you need it.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
Desert185 is offline   Reply With Quote
Old 08-02-2016, 09:11 AM   #9
sourdough
Site Team
 
Join Date: Feb 2014
Location: W. Texas
Posts: 17,601
I'm a little late but I'll chime in; YES, get/use a torque wrench. 200# clicker for this stuff I think (150 will work just fine). Also, the longer the handle the easier it is to apply the torque. Trying to torque 200# with a 10" (just an illustration) handle is tough.
sourdough is offline   Reply With Quote
Old 08-02-2016, 09:20 AM   #10
audio1der
Senior Member
 
audio1der's Avatar
 
Join Date: Sep 2012
Location: Airdrie, Alberta
Posts: 552
Having broken 2 wheel studs over the years, I would now not rely on anything but my trusty torque wrench for ANY wheel nuts. I keep an inexpensive one in the trailer just in case, keeping the good one in the garage at home.
__________________
2013 Passport 3220BHWE, upgrade axles, Kumho Radial 857's, all LED, TST507 TPMS, Reese DCSC, DIY corner stabilizers
2012 Ram 1500 Sport crew cab, Hemi, 4x4, 3.92 LSD, factory brake controller, S&B CAI w/scoop, Moroso air/oil can, 87mm ported/polished/knife-edged throttle body, Magnaflow exhaust, 180* t-stat, Rear lowered 2", Airlift 1000.
audio1der is offline   Reply With Quote
Old 08-05-2016, 05:34 AM   #11
John & Co
Junior Member
 
Join Date: Jul 2016
Location: Central Florida
Posts: 6
Sorry for this late reply to your GREAT information! Right after I posted that question I had to deal with a death in the family, so I couldn't respond until now.

Again, many thanks! I'll be looking for a torque wrench!

John
__________________
In Central Florida
Current Camper: 2017 Hideout 232LHS
TV: 2WD 2012 King Ranch F-150 Ecoboost
ΣΧ UCF '78
John & Co is offline   Reply With Quote
Old 08-05-2016, 05:41 AM   #12
John & Co
Junior Member
 
Join Date: Jul 2016
Location: Central Florida
Posts: 6
Thanks for all your GREAT responses! A death in the family prevented me from responding to you all until today. I'll be looking for a torque wrench!

Again, thanks!

John
__________________
In Central Florida
Current Camper: 2017 Hideout 232LHS
TV: 2WD 2012 King Ranch F-150 Ecoboost
ΣΧ UCF '78
John & Co is offline   Reply With Quote
Old 08-05-2016, 10:04 AM   #13
Ken / Claudia
Senior Member
 
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
They can and do leave the vehicle when not properly tightened or checked. If so you will see it past you and maybe who it hits. Don't be that guy.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
Ken / Claudia is offline   Reply With Quote
Old 08-06-2016, 05:30 AM   #14
Bigiron
Junior Member
 
Join Date: Aug 2015
Location: South Florida
Posts: 28
I too never worried about proper torque. As we have added to the family and head out on the road fully loaded, I just take a little extra care and torque everything. This way there is no doubt things are correct. I got a Craftsman that seems pretty well made. I think it goes to 170# which is good for the F 250 lugs and the toy hauler lugs.
__________________

2016 Impact 311
2002 F-250 7.3 (retired, but still own)
2016 F-350 6.7 Platinum
2010 EZGO
Bigiron is offline   Reply With Quote
Old 08-06-2016, 06:38 AM   #15
Barbell
Senior Member
 
Join Date: Jun 2013
Location: Arizona
Posts: 375
I second everything already said about getting a "clicker" wrench rather than a beam model and its use. Also, the very last thing I do before starting out each day is to check the lug nuts because that is when the slides are in. I am too old to be crawling under slides to check lug nuts.
Barbell is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 04:07 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.